ENGLISH
2.0 L1 SYSTEM FUNDAMENTALS This section will discuss some of the basic operating fundamentals of your L1 System. 2.1 COMPUTER REQUIREMENTS L1 Systems are supplied with a portable, 2-in-1 laptop computer. The computer may be mounted to the FMM Test Frame or may be used on the workbench or desktop. The L1 software for your system has been installed and tested prior to shipment. NOTE 1. The L1 tablet should not be operated on battery power. 2. Starrett recommends the use of an uninterruptible power supply (UPS) with the L1 System, especially in locations that experience power outages and brownouts. 2.1.1 L1 TABLET OVERVIEW Your L1 tablet has our L1 software pre-installed and tested. The L1 tablet and software are optimized for touchscreen operation. The L1 tablet is supplied with a full QWERTY-style keyboard which may be removed. The L1 tablet display is 10.1 inches (1280 x 800). The L1 tablet display has the ON/OFF button on the back panel. Press to power the L1 tablet ON. Use the Windows ® OFF function to power the L1 tablet OFF. The L1 tablet display module has a Micro-USB 2.0 connector. Use the Micro-USB cable supplied with your L1 System to connect the L1 tablet to your FMM Test Frame. The FMM Test Frame USB connection is located on the back panel of the test frame. The L1 tablet's keyboard has two additional USB 2.0 connectors.
2.1.2 L1 TABLET SETTINGS Microsoft frequently updates its operating systems, in particular, driver software. Starrett recommends that the L1 tablet be setup to "Install Updates Automatically". If automatic updates are not permitted, it is the responsibility of your network administrator to ensure that the L1 tablet has the correct and most current updates for the operating system and device drivers. NOTE Starrett recommends that your L1 tablet is setup to "Install Updates Automatically" from Microsoft. The Power settings for your L1 tablet should not allow the L1 tablet to go into Sleep mode. Sleep mode interrupts communication to the FMM Test Frame and L1 software. If the L1 System is not in use, log-off the system and log-in to the system when you are ready to resume testing. CAUTION Do not use "Sleep Mode" on your L1 tablet. NOTE Use the Log-In and Log-Off procedure to correctly power On or power Off the L1 tablet and software.
Shown: L1 Tablet used on workstation
10 PKG08807 - UML1
Made with FlippingBook - professional solution for displaying marketing and sales documents online