ENGLISH
2.2 L1 DISPLAY LAYOUT This section will describe the basic layout of your L1 display. 2.2.1 HEADER BAR The L1 header bar includes the following: • Main L1 Menu • Load Cell Status • Crosshead Speedometer • Test Frame Operating • Test Name • Test Type 2.2.1.1 MAIN MENU Select the Main L1 Menu target to access the L1 System Settings, to print reports or to Log-In and Log-Out of the system. 2.2.1.2 LOAD CELL STATUS The Load Cell symbol displays the full scale capacity of the BLC Load Cell that is connected to the system. The full scale value is displayed beneath the system. Select the Load Cell symbol to view the sensor's model number, serial number, last calibration date and overload history.
2.2.1.3 CROSSHEAD SPEEDOMETER The crosshead speedometer is used to control crosshead speed when in manual control. The speedometer has two speed sets: Normal and Slow. When in Normal speed, the pointer points to the right and has a green dot. Normal speed means the crosshead will obey the Motion setting. Pressing the jog key will cause the crosshead to ramp up to the maximum speed set in the Motion setting. When in Slow speed, the pointer points to the left and has a green dot. Slow speed means that when you press the jog key, the crosshead will only move at the slow speed rate for the FMM digital tester frame. This speed rate is 0.002 in/min (0.05mm/min). NOTE The Slow speed rate should be used with setting up the fixtures for your test. It is especially recommended whenever you are manually positioning the crosshead in the compression direction. 2.2.1.4 TEST FRAME MODE The FMM Test Frame only operates in Normal mode as depicted by the mode symbol.
L1 Settings Access
BLC Load Status
Test Frame Mode- NORMAL
BLC-100 487709 1/1/17
0
Slow Mode Normal Mode
Shown: L1 Main Menu view with BLC Load Cell Status
PKG08807 - UML1 11
Made with FlippingBook - professional solution for displaying marketing and sales documents online