ENGLISH
4.3.3.6 DATA STAGE The Data stage displays the default results for the test template type. And you may select optional results from a list, also based on the test template type. The table shows the test method type and its associated primary and secondary results. The primary results are the default results always displayed. The secondary results are results that may be selected using the +Add Coefficient feature.
4.3.4 CYCLE LIMIT TEST The L1 System lets you perform two types of Cycle Limit testing: • Cycle for a Count • Cycle for a Duration You may create a test using two limit values. These values may be either load-based or distance-based. In a Cycle Count test, you specify the number of cycles to be completed by the crosshead continuously moving to each of the two limits for a specified number of cycles. The maximum number of cycle counts is 99,999. The Cycle Duration test, specifies two limits and the crosshead will continuously move to each of the two limits for a specified time duration. The maximum time duration for a cycle duration test is 99,999 seconds (27 hours). NOTE Long duration tests require a smaller sampling rate. The maximum number of data points that can be collected and saved is 100,000. Therefore, use a sampling rate of 1Hz for tests with a duration of 99,999 seconds. 4.3.4.1 CYCLE TYPE The CycleTypemay be either tension or compression. If theType=Tension, when the test starts, the crosshead will move upwards to the first Limit. If the Type=Compression, when the test starts,the crosshead will move downward to the first Limit. 4.3.4.2 LIMIT TYPE The Limit Type defines whether you are cycling between two load limits or distance limits. If Limit Type=Load, the Target 1 and Target 2 values are both load value limits. If Limit Type=Distance, the Target 1 and Target 2 values are both distance value limits. NOTE The Limit Type must be the same. You cannot have one limit as a load and the other as a distance using L1 software.
BREAK TEST COEFFICIENTS BREAK LIMIT TEST TEMPLATE PRIMARY RESULTS
SECONDARY RESULTS
Lmax (Maximum Load)
Lbrk (Break Load)
D@Lmax (Distance @ Maximum Load)
Dbrk (Break Distance) S (Speed)
D (Date) T (Time)
PKG08807 - UML1 31
Made with FlippingBook - professional solution for displaying marketing and sales documents online