ENGLISH
4.3.4.9 SPEED 2 The Speed 2 is the crosshead velocity to Target 2. 4.3.4.10 EXCEPTIONS (+ STOP IF) The optional exception rules for the Cycle Limit test are: • Load
4.3.4.11 DATA STAGE The Data stage displays the default results for the test template type. And you may select optional results from a list, also based on the test template type. The table shows the test method type and its associated primary and secondary results. The primary results are the default results always displayed. The secondary results are results that may be selected using
• Distance • Break % LOAD EXCEPTION Enter a Load value. If the measured load equals this value, and the distance limit has not been achieved, the test will stop. DISTANCE EXCEPTION Enter a Distance value. If the measured distance equals this value, and the load limit has not been achieved, the test will stop. BREAK % EXCEPTION Enter the % Drop value and Minimum Break value to define a break event. Requires entering a Minimum Break also. If a break condition occurs, before the load limit is measured, the test will stop.
the +Add Data feature. CYCLE TEST COEFFICIENTS CYCLE LIMIT TEMPLATE LOAD PRIMARY RESULTS ΔDp (Delta Distance Peaks) ΔDv (Delta Distance Valleys)
SECONDARY RESULTS Cnt (Cycle Count) Dur (Cycle Duration) S1 (Speed 1) S2 (Speed 2)
D (Date) T (Time)
CYCLE LIMIT TEMPLATE DISTANCE PRIMARY RESULTS
SECONDARY RESULTS Cnt (Cycle Count) Dur (Cycle Duration) S1 (Speed 1) S2 (Speed 2)
ΔLp (Delta Load Peaks) ΔLv (Delta Load Valleys)
Default and primary coefficients are automatically selected.
Data Step
D (Date) T (Time)
Select "+ Add Data..." to choose secondary coefficients from a List
Shown: L1 CYCLE LIMIT Test Data setup
PKG08807 - UML1 33
Made with FlippingBook - professional solution for displaying marketing and sales documents online