ENGLISH
1.0 INTRODUCTION Thank you for selecting the L1 System for your force measurement testing. Your L1 System may be used for tension and compression testing including specific test methods such as peak, break, constant hold, flexural, shear, peel, coefficient of friction and more. Your L1 System should be used with Starrett equipment and accessories only. For optimum performance, your L1 System should be maintained and serviced annually by an authorized Starrett representative. 1.1 L1 SYSTEM ARCHITECTURE Your L1 System consists of the FMM Digital Testing Frame, L1 tablet with L1 software, a BLC Load Cell Sensor and test fixtures. Together, these components provide you with a full-featured testing system for most basic force measurement testing applications. 1.1.1 FMM TEST FRAMES The FMM Test Frames are available in either "Standard" or "Extended" travel formats. • Standard travel frames have a total crosshead travel of 20" (508mm) • Extended travel frames have a total crosshead travel of 30" (762mm) • FMM Test Frames are available in three capacities: 110lbf, 330lbf and 550lbf (500N, 1500N, 2500N) • FMM Test Frames have been designed exclusively for use with the L1 tablet and L1 software
FMM-330 Test frame- standard travel
BLC Load Cell Sensor
Optional test fixture top
Optional test fixture bottom
L1 Tablet touchscreen
Shown: L1-330 system with tablet touchscreen and keypad module removed
8 PKG08807 - UML1
Made with FlippingBook - professional solution for displaying marketing and sales documents online