ENGLISH
4.4 DELETING A STEP Steps may be selected by touching the step reference number. Touching the step on the left will expand the step for editing and step definition. Select the step reference number to delete a step, then select the delete symbol (X). This will permanently delete the step.
4.3 ADDING A STEP Crosshead move steps are listed at the bottom of the test setup menu. Six types of steps are listed and available for your to add: Tension, Compression, Cycle, Hold, Datum and Ask. The individual step types will be described later in this section. To add a step, select the crosshead step type. The step will automatically be added above the Data step (except Loop steps which are inserted after the Data step). Adding another move step will add that step sequentially to your test setup list. If multiple move steps are used, the steps are listed in the order you added them to your test setup, but always above the Data step.
Select a Stage Move type. Our example Adds a Tension Load Move.
Select the Stage Move to Delete. Select the "X" to delete the step.
12 PKG08819-UML2SOFT
Made with FlippingBook - professional solution for displaying marketing and sales documents online