ENGLISH
8.0 CYCLE AND LOOP STEPS Your L2 controller allows you to perform cyclic testing. Cyclic tests occur between multiple steps where the actions of these steps are repeated either by a number of counts or by using a time period. 8.1
CYCLE COUNT When you cycle within a test, you must specify the step where you want your cycle to begin. You then specify the number of times you want the cycle to be performed. The minimum cycle count = 2. The maximum cycle count = 1000. Typically, you will have at least two steps that you wish to cycle between, but you may have a series of steps that you can cycle.When multiple steps are cycled, you specify the first step and then all steps starting with the first step and the last step prior to the cycle move step will be performed. • Select the Cycle symbol. • Select the Cycle Count symbol. • Select the first step where the cycle will begin. • Specify the number of counts that the cycle shall be performed.
Specify the Step Number where the cycle will begin.
The "link" shows what steps are connected by the cycling step.
Use the Cycle Count step when you want to repeat a step(s) a specified number of times.
Specify the number of "repeats" that the steps will be performed. Minimum = 2 Maximum = 1000
Cycle steps
20 PKG08819-UML2SOFT
Made with FlippingBook - professional solution for displaying marketing and sales documents online