ENGLISH
12.0 DATA (COEFFICIENTS) Coefficients or results are selected from a list of values in the Data menu. These data elements are the results you want reported for your test setup.
TABLE 13 - COEFFICIENT/DATA TABLE LABEL NAME
DESCRIPTION
L
Load
The measured load value from the load cell sensor.
Lbreak Break Load
The measured load where a break condition occurred based on a % drop in load from a measured maximum (peak) load value.
Lave Average Load
The average load measurement.
Lpeak Maximum (Peak) Load
The maximum (greatest) load achieved during a test run.
Lmin Minumum Load
The minimum (smallest) load achieved during a test run.
Ldelta Change (Delta) in Load
The measured change between two load values.
The measured distance value from the encoder representing the distance your crosshead has traveled. Distance is not an absolute distance. Distance is a relative distance from zero. The amount of crosshead travel where a sample break has occurred. It is the distance where the break event occurred based on a % drop in load from a measured peak, or from a specified drop in load.
D
Distance
Dbreak Distance at Break
Dmax Maximum (Peak) Distance The maximum distance (peak) obtained. Often used with a load target test. Dmin Minimum Distance The minimum distance obtained during a test. Dmaxl Distance at Peak (Max) Load The associated distance value that corresponds with the maximum (peak) load measurement obtained during a test. Dminl Distance at Minimum Load The associated distance value that corresponds with the minimum load measurement obtained during a test. Ddelta Change (Delta) in Distance The change in distance measurement often used in creep or relaxation test setups. Dur Duration
Reports the duration of the test sequence. May be the duration for the entire test or the duration between a step range: begin at step X and end at step Y.
S
Speed
Reports the speed of the associated step. The speed is the velocity of the crosshead at the associated step.
Date Date
Reports the date the test run was performed. The format depends on the Date Settings. May be MM/DD/YY or DD/MM/YY.
Time Time
Reports the time when the test run was started. Time is reported as HH:MM:SS.
Ncyc Number of Cycles
Reports the number of cycles completed.
Ans Answer
Reports the answer for a specified ASK step in your test.
PKG08819-UML2SOFT 27
Made with FlippingBook - professional solution for displaying marketing and sales documents online