ENGLISH
17.1.3.2 DRO SECTION The DRO (Digital Read Out) section of the display shows active measurements for load and distance/height. The DRO section contains the following attributes: • Load Bar Graph • Load Target, Mode Symbol and Measurement • Distance or Height Target, Mode Symbol and Measurement • Status Indicators The Load Bar Graph displays the measured load in a graphical format. The bar graph fills from the center (zero) position. Tensile loads fill the bar graph from the center upward, while compressive loads fill the bar graph from the center downward. The bar graph uses color to indicate the percentage of load being applied to the load cell sensor relative to the sensor's rated load capacity. The bar graph will display normal when the measured load is 0 to 75% of the sensor's rated capacity. The bar graph will display yellow when the measured load is 76% to 90%. The bar graph displays red when the measured load is over 90%. Caution should be exercised when the bar graph is displaying yellow. This indicates that you are operating at the upper range of the load sensor, which is perfectly acceptable. The red color indicates that you are operating at the extreme high end of the sensor's capacity. You should exercise extreme caution in order to not overload the load cell sensor.
The L2 Main Menu is used to gain access to the System Settings. It also is used to access the Print function for printing reports. The L2 Main Menu also has the On/Off function.
Use to Print to Local Printer
Go to Main Settings
Crosshead status arrows animate when the crosshead is moving and shows the direction of travel.
OFF Target Turns L2 Off
Login Target
Shows the test mode (Tension) and the direction of crosshead travel.
The Load (L) and Distance (D) targets. Press to zero the measured value being displayed.
PKG08819-UML2SOFT 47
Made with FlippingBook - professional solution for displaying marketing and sales documents online