Describes the range of color variation between tiles. V1 – Uniform Appearance V2 – Slight Variation V3 – Moderate Variation V4 – Extreme Variation
Tile has a shiny finish.
Tile is suitable for floor use. Refer to wear rating for application.
Tile has a flat, non – glossy finish.
Tile is only suitable for wall use; cannot be used on floors.
Tile has a surface area with both matte & gloss characteristics.
Tile is frost – resistant and can be used in a freeze – thaw application. Refer to slip resistance for suitability for exterior floor applications.
The durability determining recommended application. PEI 1 – Wall only PEI 2 – Light-traffic residential PEI 3 – Moderate residential PEI 4 – Heavy residential/Mod.comm. PEI 5 – Heavy res/comm.
Measurement of tile thickness to determine its recomnended application.
Tile is suitable for pool or spa use and most other submersible applications.
Slip Resistance (DCOF) refers to a tiles ability to resist slipping. Suitable for most residential floor surfaces. Applications could include most kitchens and living areas. Not suitable for floors exposed to water. Slip Resistance (DCOF) refers to a tiles ability to resist slipping. Suitable for most flat residential & commercial applications that are essentially dry.
Tile has relief or 3D properties.
Slip Resistance (DCOF) refers to a tiles ability to resist slipping. ≥0.60 - Tile is suitable for most flat traffic areas exposed to water.
Made with FlippingBook Digital Proposal Creator