GranoStone 1mm, 2mm, 3.5mm
TEXTURE COATING SYSTEMS
ULTRA PREMIUM EXTERIOR
ABOUT
GranoStone 1, 2 & 3.5mm consists of a tough, pigmented acrylic-based binding layer into which is then embedded a graded aggregate in sizes of 1, 2 & 3.5mm. GranoStone 1, 2 & 3.5mm is a long lasting and economical means for simulating a wide variety of exposed aggregate and sandstone finishes in a coloured acrylic matrix. GranoStone 1, 2 & 3.5mm must be sealed with GranoGlaze Satin to provide enhanced durability and performance to the system.
FEATURES & BENEFITS
TECHNICAL INFORMATION
• GranoStone is available in a large range of colourfast natural aggregates and tinted acrylic bases to meet individual project colour requirements • GranoStone Base is applied via spray or roller and the appropriate aggregate is sprayed by hopper gun into the GranoStone Base whilst still wet • GranoStone Base may be tinted to any colour, however should be of similar colour to the colour of the aggregate being applied
Clean up: Water Colour options: Tintable Spread Rate: As per specification Touch Dry: 4 Hours Recoat: 24 Hours Cure: 7 Days
CATEGORIES
BRANDING
Master Brand - Wattyl Sub Brand - Granosite
Exterior Facades - Texture - Aggregate
GLOSS LEVEL INDICATOR Flat 0 2 5 30 50 10 Satin 20
High Gloss
70
80 90 100
Satin*
*When overcoated with GranoGlaze.
Wattyl Product Catalogue 2019 / Q2
Made with FlippingBook - Online Brochure Maker