FEATURE
HEATPUMPS f
GRANT ENGINEERING’S A-RATED PRE-PLUMBED CYCLINDERS ARE THE PERFECT PARTNER FOR RENEWABLE HEAT SOURCES... Save time on installation
S electing suitable supporting Grant. In addition to providing a highly efficient heat source for the property, Grant also specifies and supplies supporting technologies and accompanying heat emitters, under one roof, to ensure the best suited heating solution with maximum efficiencies. Supporting technologies include Grant’s high-performance wave cylinders which have been designed to heat water quicker and more efficiently, making it a perfect partner for technologies for a home heating system couldn’t be easier with renewable heat sources like the Grant Aerona³ R32 air source heat pump range and the Grant Vortex condensing oil boiler range. In addition to offering
indirect single and twin coil cylinders in both 200-litre and 300-litre, Grant also offers a 200-litre pre-plumbed and pre-wired cylinder that allows quick and convenient installation. The A-rated pre-plumbed and pre-wired water cylinder comes configured for two heating zones and a domestic hot water zone, with an option to add an extra heating zone. Grant’s pre-plumbed and wired cylinders are becoming increasingly popular amongst plumbers throughout Ireland thanks to pre- configured electronic wiring that allows the installer to connect controls, pumps and motorised valves together in a simple to understand manner. The wiring centre also does all the complicated cross wiring during installation.
Grant’s Aerona³ R32 heat pump
“Grant also offers a 200-litre pre-plumbed and pre-wired cylinder that allows quick and convenient installation.”
CONSIDERATIONS WHEN CORRECTLY SIZING A HOT WATER CYLINDER
BENEFITS OF INSTALLING A GRANT HOT WATER CYLINDER • 10 year guarantee (subject to T&C’s) • 3kW immersion • 22mm & 28mm compression fittings • Fast recovery stainless steel corrugated coils • Digital thermostat and pressurised kit supplied with all cylinders
• The main heat source • Property size • Number of bathrooms • Suitability of the water supply • Number of occupants the cylinder will service • The demands of the end user
Grant offers those working on new builds or deep retrofits the opportunity to save time by having the full heating system designed and correctly sized by technical specialists. This free home heating design service includes, room-by-room heat loss calculations in line with SR:50 guidelines. Grant also advises on heat emitters and the most efficient supporting technologies. To avail of this offering send house plans, a contact number and heat emitter preferences to heatpump@ grantengineering.ie
Installation of the Grant Wave Cylinder range.
Grant’s range of Wave cylinders are manufactured from duplex stainless
steel and are indirect, mains water cylinders. The single and double coil cylinders are high gain, leading to faster heating times and quicker recovery. Installing a hot water cylinder is step one to maximising a property’s efficiency, however, it is vital to correctly size hot water cylinders. Too small and there will be limited water for the property - too big and energy will be wasted.
Contact the Grant Technical Team: T: 0800 0443261 (NI)
T: +353 (0)57 9126968 (ROI) E: info@grantengineering.ie www.grantengineering.ie
Grant pre-plumbed cylinder
FOLLOW US ON:
PLUMBING & HEATING MAGAZINE | 21
www.plumbingmag.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online