Automation Catalog


Installation clamping module with central lock for automation solutions

Pull-in/locking force up to [kN]

Model No.

Holding force [kN]

Weight [Kg]


Blow out

570263 KH20




 Hydraulic opening.  Pneumatic blow-out.  Operating pressure: 60 bar - 70 bar.  Cover and piston hardened.  Repetition accuracy < 0.005 mm.  With opening control (pneum.) and support control (pneum.).

Design: With central lock, blow-out, support control and opening control. Application: Zero-point clamping system for automation solutions for set-up-time-optimised clamping during cutting and non-cutting machining. Note: Central lock with pneum. cleaning function of support surfaces. Fastening and installation of the pull-stud by means of DIN ISO countersunk head screw M12. Opening control: Dynamic pressure with opened clamping module, flow-through with locked clamping module. Support control via the blow-out function: Dynamic pressure with supported interchangeable pallet. The installation clamping module is opened hydraulically and mechanically locked through spring force. Subsequent uncoupling of the pressure line is possible at any time (module is clamped at normal pressure). The clamping module has four connections: 1 = hydr. opening 3 = pneum. Blow-out and support control

4 = pneum. Opening control inlet 5 = pneum. Opening control outlet

Dimensions: Model No. Size

dia. D [mm]

dia. DN [mm]

dia. D1 [mm]

H [mm]

HA [mm]

dia. LK [mm]

T [mm]


570263 KH20 112


78 44 10 88 M6 34


Made with FlippingBook - Online Brochure Maker