AUTOMATION SOLUTIONS FROM VEKTEK An automation solution today includes a variety of interconnected, versatile products and technologies. Through the possibility of a fully automatic and process-sure machine configuration, our automation solutions meet the requirements for seamless integration into the automation system. Numerous sensing options, optional coupling elements and blow-out and blow-off of the modules speak for themselves!
IS THE MODULE OPEN? Monitor the piston position (opened) with pneumatic back pressure by a differential pressure switch.
1. OPENING CONTROL
DIRT AND CHIPS IN THE CLAMPING MODULE? Use compressed air for cleaning dirt and debris from the inside and provide workpiece sensing through a differential pressure sensor. DIRT AND CHIPS UNWELCOME IN THE MODULE? The central lock prevents dirt and chips from entering when the pull-stud is being removed. It replaces the previously required protection pull-stud. IS THE PULL-STUD PRESENT ON THE FIXTURE? The retracting stud activates a stop valve, which helps to eliminate pneumatic or hydraulic static pressure. This condition is detected by a differential pressure switch. IS THE MODULE LOCKED? With an open module, the integrated stop valve creates a pneumatic static pressure, which is sensed via a differential pressure switch.
2. INTERNAL BLOW-OUT
6
1
3. CENTRAL LOCK
2
3
4. STUD SENSING
5. LOCKING CONTROL
7
ARE COUPLING ELEMENTS TO A FIXTURE NECESSARY? Oil and compressed air can be run through our couplings without leaks.
6. COUPLING ELEMENTS
5
1
4
IS A WORKPIECE SEATED WITHOUT GAP OR NOT? The blow-out function with compressed air cleans the support surfaces and can also be used for workpiece support control through a differential pressure sensor.
7. BLOW-OFF/SUPPORT CONTROL
48
Made with FlippingBook - Online Brochure Maker