ZERO-POINTS
Pull-in/locking force up to [kN]
Holding force [kN]
Size
Blow out
Model No.
● ●
570261 570260
KP10.3 KP20.3
10 17
25 55
Single Acting Pnuematic Clamping Module for Automation Solutions
Design: Centric blow-out, Sensing on opening and locking control. Application: Zero-Point Clamping System for automation solutions. Set-up-time optimized, clamping during cutting and non-cutting machining. Note: Locking control (clamp sensing): Dynamic pressure with locked clamping module, flow-through with opened clamping module. Opening control: Dynamic pressure with opened clamping module, flow-through with locked clamping module. Support control via the blow-out function: Dynamic pressure with supported interchangeable pallet. The installation clamping module is opened pneumatically and locked mechanically by spring force. Subsequent uncoupling of the pressure line is possible at any time (module is clamped at normal pressure). The clamping module has five connections:
Pneumatic opening. Pneumatic blow-out.
Operating pressure for opening: KP10.3 min. 5 bar - max. 12 bar. KP20.3 min. 4.5 bar - max. 12 bar. Cover and piston hardened. Repetition accuracy < 0.005 mm. With locking control (pneum.), opening control (pneum.) and support control (pneum.). (Studs Sold Separately)
1 = pneum. Opening 3 = pneum. Blow-out 4 = pneum. Opening control inlet (unclamp sensing) 5 = venting 8 = pneum. Locking control inlet (clamp sensing) Dimensions:
KP20.3
KP10.3
dia.D [mm]
dia.DN [mm]
dia.D1 [mm]
H [mm]
HA [mm]
dia.LK [mm]
T [mm]
Model No.
Size
M
570261 KP10.3 112 22 78.0 35 10 88 M6 25 570260 KP20.3 138 32 102.0 49 15 115 M6 34
Hydraulic Clamping Module for Automation Solutions
Pull-in/locking force up to [kN]
Holding force [kN]
Model No.
Size
Blow out
●
570262 KH20
20
55
Hydraulic opening. Pneumatic blow-out. Opening operating pressure: min. 60 bar - max. 70 bar. Cover and piston hardened. Repetition accuracy < 0.005 mm. With opening control (pneum.) and support control (pneum.). (Studs Sold Separately)
Design: Centric blow-out, support control and opening control. Application: Zero-Point Clamping System for automation solutions. Set-up-time optimized, clamping during cutting and non-cutting machining. Note: Opening control (unclamp sensing): Dynamic pressure with opened clamping module, flow-through with locked clamping module. Support control via the blow-out function: Dynamic pressure with supported interchangeable pallet. The installation clamping module is opened hydraulically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free).
The clamping module has four connections: 1 = hydr. opening 3 = pneum. Blow-out and support control 4 = pneum. Opening control inlet (unclamp sensing) 5 = pneum. Opening control outlet (VENT) Dimensions:
Model No.
dia.D [mm]
dia.DN [mm]
dia.D1 [mm]
H [mm]
HA [mm]
dia.LK [mm]
T [mm]
Size
M
570262 KH20 112 32
78 44 10 M6 88 34
49
Made with FlippingBook - Online Brochure Maker