1” Manifold with balancing valves M/F
The manifolds are manufactured of CW614N alloy brass profiles compliant to European standard EN 12167 and DIN 50930/6 on the suitability of brass fittings for drinking water installations. They are manufactured in 3/4’’, 1’’ and 1 ¼” dimensions, from 2 to 10, 1/2” outlets. The manifold’s threading is constructed according to EN ISO 228. The product has low hardness so that it may be more resilient to mechanical stresses and stands out for its extra thick walls Brass Manifolds
1” Manifold with balancing valves M/F
15 25
50
24x19 ή 3/4
L
L= (Αριθµός οπών Χ 5 cm) + 1,5 cm
B
G
A
C
L L= Number of outlets Χ 5 cm
1” Manifold with balancing valves F/F
1” Manifold with balancing valves F/F
DIMENSIONS
A B C D G I
P
3/4”
25 25 25
1/2” 1/2” 1/2”
50 34 50 38
3/4”
34 26 40 26
1”
1”
11/4”
50 48 11/4” 50 26
24x19 ή 3/4”
L= Αριθµός οπών Χ 5 cm B C L
Regulating bar manifolds (with PTFE sealing)
The manifolds are manufactured of brass bars compliant to the European norm EN 12167 and DIN 50930/6, which refer to the suitability of brass fittings for drinking water installations. The product has low hardness so as to be more resistant to mechanical stresses. The mechanisms in the manifold are vertically placed therefore increasing the circuits and improving the flows. The manifolds are used in heating and plumbing installations of hot and cold water. They are produced in sizes ¾”, 1” and 1 ¼” from 2 to 12 outlets with 24x19 or ¾” threading.
DIMENSIONS
A B C D F
E 1”
I
1”
1”
25 50 88 38 25 50 98 48
37 42
11/4”
11/4”
11/4”
58
Made with FlippingBook Annual report