BOTTOM VENT /STARTER STRIP TEP-BVS
DESIGN FEATURES
The primary use for the bottom vent/starter strip is to allow sufficient ventilation from the bottom of the cavity area behind the cladding and also provide the correct kickout for the horizontal overlap of the cladding planks. The bottom vent/starter strip works in conjunction with the top vent strip providing enough airflow to let any moisture evaporate naturally reducing the risk of mould, fungi and decay attacking the cladding product.
MATERIAL
1050 H14 A50 aluminium alloy, milled finished.
NOTE
Available in three standard depths to suit 25mm, 38mm and 50mm timber battens.
12
www.truelineproducts.co.uk. | TrueTrims © | Pressed Aluminium Trims
Made with FlippingBook - Online catalogs