ELECTRIC TRIM TAB KITS 11
lencomarine.com
LS-Limited Space Trim Tab Kits 12V System TWO STYLES TO CHOOSE FROM
Airboat Trim Tab Kit 12V System
Engineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. These kits are updated with 11-gauge stainless steel blades. Boat lengths 14' (4.3 m) to 25' (7.6 m)
The world’s first Airboat specific design. The planing surface provides greater lift and less drag. Engineered to prevent the tab from digging in during hard turns resulting in a safer ride
15125-101 Standard Actuator
15088-101 XDS Actuator
15112-101 shown here
Retracted
Extended
4" X 12" Tab Size
4" X 12" Tab Size
Blades are constructed of a stronger 11-gauge laser cut 304 stainless steel and 3/8" (9.5 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.
Blade is constructed of 12-gauge (2.7 mm) laser cut 304 stainless steel with a welded on stainless steel adjustable lower actuator mounting bracket & 1/8" (3.2 mm) diameter hinge pin. High impact corrosion proof upper mounting bracket with mechanical cable gland seal.
Kits include: • (2) 11-gauge stainless steel blades with option of standard finish or electro-polished finish • (2) actuators with 6' (1.8 m) lead and Deutsch connectors
Kit includes: • (1) 12-gauge stainless steel standard finish blade with 2" (5.1 cm) hinge height • (1) actuator with 6' (1.8 m) lead and Deutsch connector • (1) 30133-002 actuator extension wiring harness - 14' (4.3 m) length • (1) 15085-001 upper mounting bracket with gland seal
• (2) 30133-103 actuator extension wiring harnesses - 20' (6.1 m) length • (2) 15085-001 upper mounting brackets with gland seal
= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.
= Width of hinge = Length of tab SIZE DESCRIPTION Size description to be used with chart below.
• Lower mounting brackets included • Lenco owner's/installation manual • Stainless steel mounting hardware
• Lower mounting bracket included • Lenco owner's/installation manual • Stainless steel mounting hardware
Part #
L" X W" Actuator In Kit Description
15112-101
9" x14" 15055-001
Airboat Kit without Switch
Special Airboat Switch sold separately
Airboat Trim Tab Switch Recommended (See page 32) Airboat Single Rocker Switch with Deutsch Receptacle. & (2) 30" (76.2 cm) Non- Terminated Power Leads - Clamshell Packaged
Min. Transom Height
Hinge Height
Actuators In Kit
Blade Finish
Part #
Description
Part # L" X W"
15095-001
Airboat Trim Tab Switch
15125-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Standard 15126-101 4" x 12" 14.5" (36.8 cm) 2" (5.1 cm) 15054-001 Electro- Polished 15052-101 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 Standard 15088-101 4" x 12" 13" (33 cm) 2" (5.1 cm) 15057-001 Electro- Polished
Switch kits sold separately See pages 30–32
Made with FlippingBook Digital Proposal Creator