ACTUATORS & HATCH LIFTS 37
lencomarine.com
Hatch Lift Features • Clear anodized aluminum tubing • Sizes 4" (10.1 cm) through 30" (76.2) stroke and available in 12V & 24V
Lenco Electric Hatch Lifts L.O.A. = Length overall, measuring from top bracket to bottom bracket 12 Volt Models
• Complete with 2' (61 cm) lead and Deutsch plug (see actuator extension harnesses on page 42) • Clutchless ball screw design will not drift, never binds and runs in sync on dual lift applications
Approximate L.O.A. Retracted 15" (38.1 cm) 20" (50.8 cm) 20" (50.8 cm) 24" (60.9 cm) 24" (60.9 cm) 29" (73.7 cm) 29" (73.7 cm) 33" (83.8 cm) 33" (83.8 cm) 37" (93.9 cm) 37" (93.9 cm) 41" (104 cm) 47" (119 cm)
Approximate L.O.A. Extended 19" (48.3 cm) 26" (66.0 cm) 28" (71.1 cm) 32" (81.2 cm) 36" (91.4 cm) 41" (104 cm) 45" (114 cm) 49" (124 cm) 53" (134 cm) 57" (144 cm) 61" (154 cm) 65" (165 cm) 73" (185 cm)
Superseded Part #
Approximate Stroke
Part #
20760-001 20762-001 20764-001 20766-001 20768-001 20770-001 20774-001 20776-001 20778-001 20780-001 20782-001 20784-001 20786-001 20788-001
HL-400 HL-600 HL-800S
4" (10.1 cm) 6" (15.2 cm) 8" (20.3 cm) 8" (20.3 cm) 12" (30.5 cm) 12" (30.5 cm) 16" (40.6 cm) 16" (40.6 cm) 20" (50.8 cm) 20" (50.8 cm) 24" (60.9 cm) 24" (60.9 cm) 26" (66.0 cm) 30" (76.2 cm)
• In-line motor design delivers 500 lbs. (226.79 Kg) of force • Water-resistant and made entirely of non-corrosive materials • Ball screw spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors • High impact, corrosion proof mounting brackets with stainless steel pull pins • Powdered metal gears for strength and precision • Stainless steel ram locks in any position • CE-certified, ignition protected and ABYC compliant
HL-800
HL-1200S
HL-1200
HL-1600S
HL-1600
HL-2000S
HL-2000
ATTENTION 20A circuit breaker & 20A rated switch required.
HL-2400S HL-2400 HL-2600
Optional Hatch lift accessories available
HL-3000
47" (119 cm)
77" (195 cm)
Stainless Steel Non-locking Slide Bracket For hatch lifts. In case of power failure, this bracket allows you to pull the hatch open a minimum of 5" (12.7 cm) in order to remove bolt for access. 70381-001
24 Volt Models 20761-001
6.25" (15.9 cm)
HL-400/24V 15" (38.1 cm)
4" (10.1 cm)
19" (48.3 cm)
20763-001
HL-600/24V 20" (50.8 cm)
6" (15.2 cm)
26" (66.0 cm)
20765-001
HL-800S/24V 20" (50.8 cm)
8" (20.3 cm)
28" (71.1 cm)
20767-001
HL-800/24V 24" (60.9 cm)
8" (20.3 cm)
32" (81.2 cm)
20769-001
HL-1200S/24V 24" (60.9 cm)
12" (30.5 cm)
36" (91.4 cm)
Stainless Steel Pull Pin Clamshell packaged 60101-001D
20771-001
HL-1200/24V 29" (73.7 cm)
12" (30.5 cm)
41" (104 cm)
20775-001
HL-1600S/24V 29" (73.7 cm)
16" (40.6 cm)
45" (114 cm)
20777-001
HL-1600/24V 33" (83.8 cm)
16" (40.6 cm)
49" (124 cm)
20779-001
HL-2000S/24V 33" (83.8 cm)
20" (50.8 cm)
53" (134 cm)
20781-001
HL-2000/24V 37" (93.9 cm)
20" (50.8 cm)
57" (144 cm)
Hatch Lift Rocker Switch (Single) 12 & 24 Volt | Single Hatch Lift Application Rocker Switch for hatch lifts with two 30" non-terminated power leads. This switch is CE certified and ABYC compliant. It is also 20A rated and clam shell packaged. 15096-001 Hatch Lift Rocker Switch (Dual) 12 & 24 Volt | Dual Hatch Lift Application Rocker Switch for hatch lifts with two 30" non-terminated power leads. This switch is CE certified and ABYC compliant. It is also 20A rated and clam shell packaged. 15098-001
20783-001
HL-2400S/24V 37" (93.9 cm)
24" (60.9 cm)
61" (154 cm)
20785-001
HL-2400/24V 41" (104 cm)
24" (60.9 cm)
65" (165 cm)
20787-001
HL-2600/24V 47" (119 cm)
26" (66.0 cm)
73" (185 cm)
20789-001
HL-3000/24V 47" (119 cm)
30" (76.2 cm)
77" (195 cm)
Made with FlippingBook Digital Proposal Creator