Model A-250P-5 SXS “Hot Hearth” Cremation Equipment
The American A-250P-SXS is ideal for high-volume facilities that wish to maximize workable space through a custom built unit that fits your building’s space. The American A-250P-SXS is ideal for high-volume facilities that wish to
8’8” (2.6m)
8’8” (2.6m)
40” (1.02m)
maximize workable space through a custom built unit that fits your building’s space. The benefit of being able to place the unit against
29’10 (9.09m)
a wall thus maximizing workable floor place.
CASE CAPACITY PER CHAMBER: 200 Lbs.
These units also have independently operated chambers for private cremations with the ability to process multiple pets at the same time. Each chamber has an independent combustion control allowing for the operation of a single chamber or any combination of all five chambers. The new SXS is available in 2-8 chamber design. Additional chambers are possible but the unit will have to be built on site. The A-250P-SXS will allow your business to operate in the most efficient and effective way.
ATTENTION MOST UNITS NEED AN AVERAGE BETWEEN 9FT - 12FT HEIGHT OF SPACE CLEARANCE FOR UNIT INSTALLATION. *For lower clearances units will have to be stripped and re-assembled in the field at an additional expense.
A-250P-5 SXS Specifications Length 29’10” (9.09m) Width
9’6” (2.90m); 10’3” with panel (3.12m)
Height
8’8” (2.64m)
Door Width
40” (1.02m)
Weight
73,000 Lbs. (33,112 kg)
Case Capacity
200 Lbs. (90.7 kg)
Per Chamber Installation Clearance Required
9’ min (2.7m); 10’ (3.05m) Recommended
Fuel Natural Gas - 2 PSI incoming at medium pressure Propane - 1000 Gallon tank (LPG pressure is regulated down to 25 PSI) Can be Modified to Accept Diesel Oil Maximum Fuel Rating 4.5MMBTU/HR @ 4285 CFH Electrical
220V/60Hz/1 Phase or 3 Phase (Nationally) 240V/50Hz/1 Phase or 3 Phase (Internationally) 60 AMP Minimum Requirement
Panel
Electromechanical or PLC with HMI
Warranty
2 year “Best in Class”
23
Made with FlippingBook flipbook maker