ANTIFOUL / PRIMERS & UNDERCOATS
*Orders containing Dangerous Goods incur a $75.00 surcharge and may increase delivery time.
PA-10 ETCH PRIMER With excellent anti-corrosive protection, PA-10 Vinyl etch primer is perfect for priming steel, aluminium or nonferrous surfaces above the waterline. A quick drying time allows over coating in 3 hours. • Coverage: up to 13sq.m/litre. (Recommended Coats: 1-3) • Coverage: up to 1.5sq.m/litre. (Recommended Coats: 2) • Overcoat with: Single-Pack Products
One-Up Primer/Undercoat A single pack primer/undercoat specially formulated for marine conditions. For use on all substrates under one-pack topcoats such as Toplac Plus and Interdeck.
• Coverage: up to 9sq.m/litre. (Recommended Coats: 3) • Thinning: Enamel Thinner #1 • Clean up: Enamel Thinner #1 Do not apply two-pack systems over this product. Do not use on areas that are permanently immersed.
• Thinning: PA-10 Thinner #5 • Clean up: PA-10 Thinner #5
Our price $49.95 $84.95 $249.95
Cat.No.
Colour
Size
61044 59956 59958
Red Red Red
500ml
Our price $38.95 $38.95 $67.95 $67.95 $189.95
Cat.No. 59400
Colour White
Size 500ml
1L 4L
59401 59402 59403 59404
Blue/Grey 500ml
White
1L 1L 4L
PA-10 THINNER #5 A specially formulated blend of solvents to work specifically with PA-10 without affecting flexibility or durability. Thin up to 50% for brush application. Up to equal quantities PA-10 when spraying.
Blue/Grey
White
PRIMOCON A one-pack aluminium pigmented anticorrosive primer. Ideal as a primer under all antifoulings and can be used as a sealer coat for unknown or incompatible antifoulings. Suitable for all substrates including Fibreglass, wood, steel and aluminium.
• Use for thinning: PA-10 Vinyl Etch Primer • Use to clean: PA-10 Vinyl Etch Primer
Our price
Cat.No.
Colour
Size
$29.95 $49.95
60162 60160
Clear Clear
500ml
• Coverage: up to 7.4sq.m/litre. (Recommended Coats: 1-5) • Over Coat With: Antifoulings
1L
Micron AP Incorporating Biolux technology and boosted biocide levels, Micron AP is an easy to apply and fast drying antifoul specifically formulated for advanced performance in high fouling areas such as tropical waters. ANTIFOULING - ABLATIVE • Coverage: up to 4sq.m/litre. (Recommended Coats: 2-3)
• Thinning: Antifouling Thinner #3 • Clean up: Antifouling Thinner #3
Our price $239.95 $71.95
Cat.No. 56432
Colour
Size
Silver Grey Silver Grey
4L 1L
56424
INTERPROTECT EPOXY PRIMER Rapid dry epoxy primer/sanding undercoat. A two-pot mix for use above and below the waterline on steel, timber and aluminium. Applied directly to fibreglass - helps in Osmosis protection.
• Priming: Interprotect or Primocon • Thinning: Antifouling Thinner #3 • Clean up: Antifouling Thinner #3 Do not use on Aluminium or Zinc
• Coverage: up to 9sq.m/litre. (Recommended Coats: 1-5) • Over Coat With: Antifoulings • Thinning: Epoxy Thinner #7 • Clean up: Epoxy Thinner #7
Size Our price
Cat.No.
Colour
$439.00 $439.00 $1049.00
55790 55791 55795
Blue
4L 4L
Our price $71.95 $124.95 $279.95 $949.00
Cat.No. 57537
Colour White White White White
Size 500ml
Black Black
10L
57539 57547 57549
1L 4L
Micron Extra 2 Optimum performance antifouling. High copper content, self polishing technology ablates slowly over time. Re-coats most existing anti-fouling with normal surface preparation.
16L
EVERDURE PRIMER Everdure timber primer and sealer is a two-pack clear epoxy resin. Designed to harden and densify timber and permanently seal out moisture. This epoxy is
• Coverage: up to 10sq.m/litre. (Recommended Coats: 3) • Priming: Interprotect or Primocon • Thinning: Antifouling Thinner #3 • Clean up: Antifouling Thinner #3 Do not use on Aluminium or Zinc Surfaces
engineered to allow maximum penetration and migration into timber while leaving an ideal base prior to applying varnish. Simple 1.1 mixing ratio.
• Coverage: up to 8 - 16sq.m/litre. • Thinning: Epoxy Thinner #7 • Clean up: Epoxy Thinner #7
Size Our price
Cat.No.
Colour
$329.00 $329.00 $329.00 $329.00 $799.00
55840 55842 55844 55841 55846
White
4L 4L 4L 4L
Our price
Cat.No.
Colour
Size 500ml Kit 1L Kit
Blue
Base & Activator Clear Base & Activator Clear Base & Activator Clear Activator Clear Base & Activator Clear Base Clear
$58.95 $77.95
60592
Black
60594
Red
$144.95 $219.95 $219.95 $1099.00
Black
10L
60596 60582 60590 60580
2L Kit
4L 4L
How much topside paint do I need? Determining how much paint you will need is fairly simple. For Topsides only , refer to the chart below.
40L Kit
ETCH PRIMER Delivering the latest technology in a two-pack primer, Etch Primer is free of hazardous materials such as Chromate making a safer working product. Designed to be applied in thin films to provide superior adhesion. • Coverage: up to 9sq.m/litre. (Recommended Coats: 1-2) • Over-Coat with: Single or Two-pack systems. For use on Aluminium only
Motor
Sail
Overall Length (Meter) Overall length (Feet)
6.1 7.6 9.1 10.7 12.2 6.1 7.6 9.1 10.7 12.2 20 25 30 35 40 20 25 30 35 40 1.5 2.5 3.5 4.0 4.5 2.0 2.4 3.5 3.7 4.0 1.0 1.25 1.25 1.5 1.5 0.75 1.0 1.25 1.25 1.5
Beam (Meter) Freeboard Height (Meter) Litres Required*
Our price
Cat.No.
Colour
Size
$65.95 $83.95
60010 60012
Yellow Base 500ml Kit
2.6 4.4 5.5 7.7 8.7 2.1 3.5 5.5 6.3 8.5 *Average amount based on 2 coats - This table is to be used as a guide only. Read the product data sheet before you start.
Yellow Base
1L Kit
177
ORDER ONLINE: www.whitworths.com.au
Made with FlippingBook Online newsletter