BILGE PUMPS & ACCESSORIES
Rule LoPro Bilge Pumps The Rule LoPro (low profile) bilge pumps are compact to fit into tight spaces in the bilge but pack real pumping power at 900GPH/3400LPH. Fully submersible. Horizontal or vertical mounting. Rotation discharge swivels 180 degrees for ease of installation. Shurflo 500GPH Bilge Pump Submersible pump for continuous duty with 3' tinned wire, anti-airlock, tough nylon housing, and ignition protection. Footprint: 86mm (2 3/8"). Port Size Outlet: 19mm (3/4"). Voltage: 12VDC. Dimensions: 114 x 95mm Cat.No.67050 RRP $59.79 Our price $52.95
TMC Electric Bilge Pumps These TMC 12 volt electric bilge pumps are fully sealed for submersible use. The motor section and impellor cartridge can unclip from the base for easy cleaning. Mounting screws and washers included.
450 GPH 900 GPH 1250 GPH
Price
Cat.No. Capacity / Amps Outlet Size O.D.
Dimensions (mm)
85(H) x 85(Dia.) $39.95 107(H) x 97(Dia.) $55.90 114(H) x 122(Dia.) $79.95
67094 67096 67098
450 GPH / 1.5A 900 GPH / 3.5A 1250 GPH / 5A
20mm(3/4”) 29.5mm(1 1/8”) 29.5mm(1 1/8”)
TMC Auto Low Profile Bilge Pump Designed specifically for tight spaces with rotating outlet ports and capable of draining down to 10mm with a built in non-return valve to prevent back flow.
Rec Ret Our price $219.00 $209.95 $164.00 $154.95
Cat.No. Description
66980 LoPro Bilge Pump 12V 900GPH 66985 LoPro Auto Bilge Pump 12V 900GPH
Price
Cat.No. Capacity / Amps
Outlet Size O.D. 19mm(3/4 " )
Dimensions in
223 x 122 x 60 $129.95
67085 67099
500GPH / 2.5A 1000GPH / 5A
25-28mm(1"-1-1/8 " ) 223 x 122 x 60 $179.90
Rule Next Generation Electric Bilge Pumps The Rule fully submersibe NEXT Generation pumps have specially designed motors for maximum capacity and reliable long life, fully sealed and protected from damage when run dry, with automatic air-lock release and built in thermal cut-out switch. An included check valve reduces the risks of backflow and threaded discharge port allows greater flexibility with interchangeable hose tails. Designed in the U.S.A, 3 year warranty. Please note: Not for use in rainwater tanks or basements. Capacity is US GPH
TMC Auto-Eye Automatic Bilge Pump Equipped with built in electronic controlled reed sensor system to make fully automatic operation easy. No separate float switch is needed and relay loop design protect the pump against instant high current. No power use until pump turns on when water rises.
Price
Cat.No. Capacity / Amps
Outlet Size O.D. 20mm(3/4 " ) 29mm(1-1/8 " ) 29mm(1-1/8 " )
Dimensions in 136 x 82 x 110
$109.95
67088
500GPH / 1.6A
165 x 96 x 130 $139.95 190 x 108 x 150 $189.90
67090 1000GPH / 4.5A
67092
1500GPH / 9A
Rec Ret Our price
Cat.No. Capacity Size
Hose I.D.
Johnson Bilge Pumps These 12 Volt, easily installed submersible cartridge bilge pumps are great value. With removable motor and impellor cartridge for easy cleaning. 2 year warranty.
67013 360 gph 99 x 74mm 3/4" (20mm) $62.00 $59.95 67019 500 gph 99 x 74mm 3/4" (20mm) $77.00 $56.95 67021 800 gph 112 x 74mm 3/4" (20mm) $90.00 $84.95 67023 1100 gph 112 x 74mm 1" (25mm) & 11/8" (27mm) $115.00 $104.95 Rule 360/1100GPH Side Mount Pump Bracket Cat.No.67010 Rec Retail $45.50 Our price $41.95
Rec Ret Price $116.10 $104.95
Cat.No . Capacity Outlet Size 67102 1600GPH 1-1/8" 67112 1000GPH 3/4"
Rule Pump Strainer This stainless steel pump strainer extends the life of all round Rule bilge pumps. The stainless steel gauze fits against the impellor housing for maximum benefit. Rule Bilge Pump Base Replacement base to suit new model Rule bilge pumps, 360, 500, 800 & 1100GPH. Cat.No. Suit Rule Pump Rec Ret Our price 66808 360 / 500 GPH $37.00 $32.95 66810 800 / 1100 GPH $40.50 $37.95 Johnson Aqua Void Cartridge Bilge Pumps The Aqua Void Cartridge Bilge Pump is designed for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection. Powered by an enhanced motor and high-flow impeller. Enjoy reliability on board with a 3 year warranty. Cat.No . Capacity Outlet Size Rec Ret Price 67107 500GPH 3/4" $79.95 $69.95 67108 800GPH 3/4" $109.90 $99.95 $232.25 $209.95 67114 1980GPH 1-1/8" or 1-1/2" $313.05 $279.95
Rule-mate Compact Automatic Bilge Pump Ultra compact with high performance and reliability, the Rule-mate is equipped with Auto water level sensing technology with a higher flowrate and less amperage than previous models.
Capacity Rec Retail Our price
Cat.No. 67045 67047 67049 67051
$164.95 $219.95 $259.95 $649.00
$177.00 $230.00 $280.00 $717.00
500GPH 800GPH 1100GPH 2000GPH
Our price $104.95
Deluxe 3 Way Switch
Cat.No.84701
Rule Electric Bilge Pumps
Designed in the U.S.A, these pumps have specially designed motors for maximum capacity and reliable long life, fully sealed and protected from damage when run dry, with automatic air- lock release. All fully submersible. 3 year warranty. Hose I.D. Rec Ret Our price
360/500GPH
Please note: Not for use in rainwater tanks or basements. Capacity is US GPH
Cat.No. Capacity
Size
$139.95
$151.00 $292.00
67017
1000 gph 102 x 73mm
1 1/8"
Our price $14.95
Rec Retail $17.75
Cat.No.66804
67025 1500 gph 152 x 108mm 1 1/8" $279.95 67033 2000 gph 152 x 108mm 1 1/8" $364.00 $349.95 67041 3700 gph 185 x 125mm 1 1/2" $617.00 $599.95
Bilge Pump Wire - 10m Sheathed 3 Core Marine Wire - 4mm tinned wire. Cat.No. Description Rating Length
Price $48.95
33154 Twinsheath tinned 3 core
16A -20°C to 90°C 10m
Spiral Bilge Pump Hose - 28mm (1 1/8”)
Our price $13.95
Cat.No.142730
Bilge Pump 3 way Switch Panel Switch for manual or automatic (use with float switch) control of any 12 volt pump. Features three way switch, red and green indicator lights, fuse and full wiring. Bilge Pump Control Panel IP65 Rating Contoured black plastic panel with 3 way rocker switch - automatic / off / manual with spring return to off from manual position. Red LED indicator light and fuse holder with fuse. Fully wired for use. 12 volt only. Panel size: 82mm x 63mm. Rec Retail $33.50 Our price $29.95
Bilge Pump Installation Kits Everything you need to instal your submersible bilge pump. Suitable for either 20mm (3/4") or 28mm (1 1/8") oulet bilge pumps.
Cat.No.84699
Rec Ret Our price
Cat.No. Description
Bilge Pump Installation Kit - 3/4 " Includes 1.5m of 20mm cuffed hose. 1 x 3/4 " nylon skin fitting and 2 x 7/8 " stainless steel hose clamps. Bilge Pump Installation Kit - 1 1/8 " Includes 1.8m of 28mm cuffed hose. 1 x 1-1/8 " nylon skin fitting and 2 x 1-1/4 " x stainless steel hose clamps
$19.99
$23.50
67015
$36.95
$39.50
67020
Our price $35.95
Rec Retail $40.50
Cat.No.84692
64
WHITWORTHS MARINE & LEISURE ORDER ONLINE: www.whitworths.com.au
Made with FlippingBook Online newsletter