Confidentiality Notice: This electronic message contains information from ElQuator Sdn Bhd which may be privileged or confidential. The information is intended to be for the use of the individual(s) or entity named above. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic message in error, please notify us by telephone or email (to the numbers or address above) immediately.
ELQUATOR WIND TURBINE
CREATOR &
DESIGNER
Danish nationality, Henrik Pryter, the CEO of ElQuator Holding Berhad always had his eyes for everything he saw. He is the brainchild of all the systems developed for the company. His vision is to see the world is less polluted and CO2 is reduced by adapting to using Renewable Energy, with or without his system. He is the creator and the owner of all the systems he believes will change how energy is produced in the future.
GET
to KNOW US
Elquator Holding Berhad is a European-owned company based in Malaysia. We own IP design rights for complete Renewable Energy systems and are the only manufacturer of vertical wind turbine systems in Southeast Asia. Our energy production system is equipped with a high-technology storage system to ensure sustainable energy supplies around the clock. We believe our state-of-the-art energy system could assist in mitigating the CO2 emissions from electricity production from coal and gas. Our technology can produce wind energy with a mere 2.3m/s wind speed and fill the storage system despite the myth that the wind pattern in this region is not suitable for generating wind power, produced by our subsidiary company, Elquator Wind Turbine Sdn Bhd.
TECHNOLOGIES BUILT we
ENERGY GENERATION SYSTEM for the WORLD Weare proud that we successfully improved the conventional windmill by
improvising the design, where we scaled down the size and changed the turbine rotation from horizontal to vertical. Our Vertical Windmill System is far more efficient with just a low wind presence. Now, anyone can own a windmill complete with a wind energy system as our design can be used anywhere in the World with a low wind knot and yet still able to produce sufficient energy. The idea behind our Vertical Windmill System is that we come up with a very light windmill with the same m2 wing area as a traditional windmill. We use natural elements to spin our shafts to drive our permanent magnate generator (PMG), same concept as the bicycle dynamo. The stronger the wind speed, the more power will be harnessed. With that, the energy storage is filled. Unlike the traditional windmill that uses high knot wind to move the blades, our Vertical Windmill System is lighter and smaller. It is more practical to be installed in any area and runs well regardless of any wind direction. Our specifically designed blades can turn the kinetic energy in wind into power that ranges 40kW per system. We design our Vertical Windmill System as simple as we could to minimize the cost but still carry a cutting edge that is high-performance deliverance. We design the pole to be tall so the blades could capture the wind speed as low as 2.3m/s to start spinning and generating energy. We make sure the power is enough as required with the build-in Energy Storage System. Everything comes in one piece, plug, and play. Saving the surplus will no longer be an issue as all energy generated is kept in our storage and made available whenever needed. We believe our Vertical Windmill System will be a phenomenon of the new renewable energy system. It will revolutionize how wind power can be generated and able to provide the green, renewable, and sustainable energy that the World needs.
SECTIONS OF THE VERTICAL AXIS WIND TURBINE SYSTEM
ENERGY GENERATION SECTION
SYSTEM’S POLE
STATOR SYSTEM
GEAR BOX
PERMANENT MAGNET GENERATOR (PMG) P0WER PRODUCE = 40kW
MAIN GEAR
STATOR MOTOR
SIMULATION OF THE VERTICAL AXIS WIND TURBINE
AN ARTIST IMPRESSION OF THE
VERTICAL AXIS WIND TURBINE ON TOP OF THE BUILDING
Vertical Axis Wind Turbine (VAWT) System System Specifications Model Capacity 10 kW Mechanical Specifications Blade Chord: 400 mm Blade Height: 5,000 mm
Total System Weight: 1,421.2 kg Energy Storage Configuration Hybrid Storage System:
30 kW Lithium-Ion Battery, and Vanadium Redox Flow Battery Performance Output by Wind Speed
4 m/s: 7.8% output 8 m/s: 62% output 12 m/s: 100% output 14 m/s: 100% output
Pricing Price: MYR [To Be Quoted] Note: Price excludes import and export duties, customs charges, installation works, and energy storage system unless otherwise specified. Product Warranty European Union:
24 months limited warranty against defects in materials and manufacturing from the date of purchase. Rest of the World:
12 months limited warranty against defects in materials and manufacturing from the date of purchase.
PROUDLY DESIGNED, PRODUCED AND MANUFACTURED BY:
VERTICAL AXIS WIND TURBINE
ELQUATOR WIND TURBINE SDN. BHD.
DRAWING PART
6
5
4
3
2
1
492.00
D
D
C
C
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
DO NOT SCALE DRAWING
REVISION: 03
POWDER COAT (BLACK)
SERIAL NUM :WT101012003XXXX-01
NAME
SIGNATURE
DATE
TITLE:
TOWER 101 PIPE 1
DRAWN CHK'D APPV'D
MFG Q.A
A
A
MATERIAL:
DWG NO.
A4
WT101012003 SHEET 1 OF 1
MILD STEEL
EST WEIGHT: 593.2KG
Quantity : 1 unit
6
5
4
3
2
1
6
5
4
3
2
1
D
D
0°
C
C
1200.00
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
SERIAL NUM :WT101022003XXXX-01
TITLE:
NAME
SIGNATURE
DATE
TOWER 101 BASE FLANGE WT101022003
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
MILD STEEL
Quantity : 1 unit
EST WEIGHT: 217.35KG
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
508.00
D
D
0°
C
C
B
B
900.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT
SERIAL NUM :WT101032003XXXX-01
TITLE:
NAME
SIGNATURE
DATE
TOWER 101 FIRST TOWER FLANGE
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT101032003 SHEET 1 OF 1
MILD STEEL
EST WEIGHT: 67.8KG
Quantity : 1 unit
6
5
4
3
2
1
6
5
4
3
2
1
D
D
10.00
C
C
B
B
196.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
WT101042003XXXX-016
NAME
SIGNATURE
DATE
TITLE:
TOWER 101 FIRST TOWER RIB
DRAWN CHK'D APPV'D
MFG Q.A
A
A
MATERIAL:
DWG NO.
A4
WT101042003 SHEET 1 OF 1
MILD STEEL
EST WEIGHT: 2.1KG
Quantity : 16 unit
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
100.00 87.50 75.00 73.34 50.00 48.34
12.50 0
B
B
40
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 02
POWDER COAT (BLACK)
WT101052002XXXX-01
NAME
SIGNATURE
DATE
TITLE:
TOWER 101 WIRE COVER
DRAWN CHK'D APPV'D
MFG Q.A
A
A
MATERIAL:
DWG NO.
A4
WT101052002 SHEET 1 OF 1
MILD STEEL
EST WEIGHT: 0.37KG
Quantity : 1unit
6
5
4
3
2
1
6
5
4
3
2
1
492.00
D
D
C
C
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
DO NOT SCALE DRAWING
REVISION: 03
POWDER COAT (BLACK)
SERIAL NUM :WT107022003XXXX-01
NAME
SIGNATURE
DATE
TITLE:
TOWER 102 PIPE 2
DRAWN CHK'D APPV'D
MFG Q.A
A
A
MATERIAL:
DWG NO.
A4
WT107022003 SHEET 1 OF 1
MILD STEEL
EST WEIGHT: 593.2KG/296.6KG
Quantity : 1 unit
6
5
4
3
2
1
6
5
4
3
2
1
508.00
D
D
0°
C
C
B
B
900.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT
SERIAL NUM :WT107012003XXXX-02
NAME
SIGNATURE
DATE
TITLE:
TOWER 102 SECOND TOWER FLANGE
DRAWN CHK'D APPV'D
MFG Q.A
A
A
MATERIAL:
DWG NO.
A4
WT107012003 SHEET 1 OF 1
MILD STEEL
EST WEIGHT: 67.8KG
Quantity : 2 unit
6
5
4
3
2
1
6
5
4
3
2
1
D
D
10.00
C
C
B
B
196.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
WT107032003XXXX-016
TITLE:
NAME
SIGNATURE
DATE
TOWER 102 SECOND TOWER RIB
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT107032003 SHEET 1 OF 1
MILD STEEL
EST WEIGHT: 2.1KG
Quantity : 16 unit
6
5
4
3
2
1
6
5
4
3
2
1
MATERIAL AISI 1020 OR AISI 1045 AISI 1020 OR AISI 1045 AISI 1020 OR AISI 1045 AISI 1020 OR AISI 1045
PART NUMBER
ITEM NO.
QTY.
PMG Body Structure 102 Part 1-102-20
1
1
D
D
PMG Body Structure 102 Part 2-102-20
1
2
PMG Body Structure 102 Part 3-102-20
3
1
PMG Body Structure 102 Part 4-102-20
4
16
C
C
3
1
700.00
95.00
B
B
4
2
900.00
A
A
PMG Body Structure 2 1
PAGE 1/5
6
5
4
3
6
5
4
3
2
1
700.00
D
D
C
C
200.00
B
B
6.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
WT102012003XXXX-01 PMG MAIN
TITLE:
NAME
SIGNATURE
DATE
DRAWN CHK'D APPV'D
CYLINDER
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT102012003
MILD STEEL
WEIGHT: 49.7KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
D
D
0°
C
C
900.00
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
SERIAL NUM :WT102032003XXXX-01
TITLE:
NAME
SIGNATURE
DATE
PMG SECTION PMG TOP FLANGE DWG NO. WT102032003 A4 Quantity : 1 unit SHEET 1 OF 1
DRAWN CHK'D APPV'D
MFG Q.A
A
A
MATERIAL:
MILD STEEL
WEIGHT: 32.2KG
6
5
4
3
2
1
6
5
4
3
2
1
D
D
10.00
C
C
100.00
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION : 03
POWDER COAT (BLACK)
SERIAL NUM :WT102042003XXXX-016 TITLE:
NAME
SIGNATURE
DATE
PMG SECTION PMG RIB
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT102042003
MILD STEEL
EST WEIGHT: 0.39KG
Quantity : 16 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
MATERIAL AISI 1020 OR AISI 1045
PART NUMBER
ITEM NO.
QTY.
GearBox Body Structure 103 Part 1-103-20
1
1
D
D
AISI 1020 OR AISI 1045
GearBox Body Structure 103 Part 2-103-20
2
1
AISI 1020 OR AISI 1045
GearBox Body Structure 103 Part 3-103-20
3
1
AISI 1020 OR AISI 1045
C
C
GearBox Body Structure 103 Part 4-103-20
4
16
3
700.00
B
B
1
700.00
95.00
4
2
A
A
GearBox Body Structure 2 1
PAGE 1/5
6
5
4
3
6
5
4
3
2
1
D
D
C
C
200.00
B
B
6.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
SERIAL NUM :WT103012003XXXX-01
NAME
SIGNATURE
DATE
TITLE:
GEARBOX SECTION GEARBOX MAIN CYLINDER
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT103012003
MILD STEEL
EST WEIGHT: 49.7KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
0°
D
D
C
C
B
B
900.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
SERIAL NUM :WT103032003XXXX-01
NAME
SIGNATURE
DATE
TITLE:
GEARBOX SECTION GEARBOX TOP FLANGE
DRAWN CHK'D APPV'D MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT103032003
MILD STEEL
EST WEIGHT: 39.2KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
D
D
10.00
C
C
100.00
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
SERIAL NUM :WT103042003XXXX-016
NAME
SIGNATURE
DATE
TITLE:
GEARBOX SECTION GEARBOX RIB
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT103042003
MILD STEEL
EST WEIGHT: 0.39KG
Quantity : 16 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
D
D
2.00
206.00
250.00 200.00
26.06
12.50
12.50
C
C
0 22.2 67.2
112.2 157.2 202.2
B
B
125.00
25.00
25.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 01
POWDER COAT (BLACK)
SERIAL NUM :WT108012001XXXX-04
NAME
SIGNATURE
DATE
TITLE: GEARBOX & PMG SECTION WINDOW
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT108012001
MILD STEEL
EST WEIGHT: 1.12KG
Quantity : 4 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
PART NUMBER MATERIAL Top Section 104 Part 1-104-20AISI 1020 OR AISI 1045
ITEM NO.
QTY.
1
1
D
D
Top Section 104 Part 2-104-20AISI 1020 OR AISI 1045
2
2
Top Section 104 Part 3-104-20AISI 1020 OR AISI 1045
3
1
Top Section 104 Part 4-104-20AISI 1020 OR AISI 1045
4
8
C
C
2
1
Weld Item 2 into Item 1 at both end of Item 1
4
2
B
B
2
3
2
10.00
A
A
Top Section
PAGE 1/6
6
5
4
3
2
1
6
5
4
3
2
1
150.00
D
D
137.45
C
C
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
WT104012003XXXX-01 TOP SECTION PIPE 03
TITLE:
NAME
SIGNATURE
DATE
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT104012003
MILD STEEL
EST WEIGHT: 7.1KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
137.45
D
D
C
C
130.00
3.73
B
B
65.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
WT104022003XXXX-01 TOP SECTION BEARING HOUSING
TITLE:
NAME
SIGNATURE
DATE
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT104022003
MILD STEEL
EST WEIGHT: 1.8KG
Quantity : 2 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
0°
D
D
C
C
B
B
900.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
WT104032003XXXX-01 TOP SECTION BASE FLANGE
TITLE:
NAME
SIGNATURE
DATE
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT104032003
MILD STEEL
EST WEIGHT: 97KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
250.00
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
POWDER COAT (BLACK)
WT104042003XXXX-08 TOP SECTION RIB
NAME
SIGNATURE
DATE
TITLE:
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT104042003
MILD STEEL
EST WEIGHT: 2.2KG
Quantity : 2 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
B
B
150.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 01
POWDER COAT (BLACK)
WT104052001XXXX-01 TOP SECTION BEARINGCOVER
NAME
SIGNATURE
DATE
TITLE:
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT104052003
MILD STEEL
EST WEIGHT: 2.69KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
120°
D
D
C
C
40
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 01
-
WT105012001XXXX-01 TOP SECTION ROTOR HEAD
NAME
SIGNATURE
DATE
TITLE:
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT105012001
STAINLESS STEEL SUS304
EST WEIGHT: 41.89KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
200.00 162.00 125.00
D
D
75.00 38.00 0
C
C
44.00
114.16
44.00
10.00
44.00
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
WT105032005XXXX-03 ROTOR SECTION WT105032005 WING ARMA
NAME
SIGNATURE
DATE
TITLE:
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
FIBER GLASS
EST WEIGHT: 8.5KG
Quantity : 3 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
D
D
0 38.00 75.00 125.00 162.00 200.00
R25.00
78.00
78.00
C
C
R25.00
76.00
B
B
114.16
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
WT105042005XXXX-03 ROTOR SECTION WT105042005 WING ARMB
NAME
SIGNATURE
DATE
TITLE:
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
FIBER GLASS
EST WEIGHT: 8.5KG
Quantity : 3 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
5000.00
D
D
3330.17
1669.84
0
C
C
1648.3 1663.8 12.00
1663.8 6.00
0 15.00
15.00
85.00
B
B
400
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
WT105072004XXXX-03 ROTOR SECTION WING
NAME
SIGNATURE
DATE
TITLE:
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT105072004
FIBER GLASS
EST WEIGHT: 60KG
Quantity : 3 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
33
2
1
D
D
C
C
5
ITEM NO. 1 2 3 4 5 6
PART NUMBER
QTY. 1 2 1 4 2 2
B
B
sheel A bottom bracket assembly' sheel B top sandwich cover up and down ENd cap
2
1
A
Wing Fiber Glass Layer DrawA
6
5
4
3
2
1
6
5
4
3
2
1
D
D
4
4
2
C
C
1
3
B
B
2
Item Number 1 2 3 4
Part Name Shell
Quantity 1 2 1 2
S1 S2 Base
A
A
Shell A Bottom
6
5
4
3
2
1
6
5
4
3
2
1
D
D
5000.00 4960.00
3630.17
3030.17
400.00
C
C
104.00
1969.84
DETAIL A SCALE 1 : 5
1369.84
40.00 0
B
B
A
A
A
Shell bottom A
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
Apply 3 layer of rowin mat
B
B
400.00
A
A
Shell
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
76.20
B
B
2.00
DETAIL B SCALE 1 : 1
Apply 2 layer of Rowin
B
A
A
S1
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
76.20
B
B
2.00
DETAIL C SCALE 1 : 1
C
Apply 2 layer of Rowin
A
A
S2
6
5
4
3
2
1
6
5
4
3
2
1
26.80
D
D
C
C
Apply 2 layer of Rowin Apply 2 layer of Mate
B
B
200.00
4.00
592.00
A
A
Base
6
5
4
3
2
1
6
5
4
3
2
1
D
D
2
3
2
C
C
B
B
Item Number 1 2 3
Part Number Shell B Top
Quantity 1 2 1
S4 S3
1
Wing Fiber Glass Layer Drawing
A
A
6
5
4
3
2
1
6
5
4
3
2
1
400.00
5000.00
D
D
3337.16 3323.16
C
C
1676.84 1662.84
202.00
0
400.00
B
B
103.00
E
DETAIL E SCALE 1 : 5
A
A
Wing Fiber Glass Layer Drawing
6
5
4
3
2
1
6
5
4
3
2
1
200.00
D
D
5000.00
3337.16 3323.16
C
C
1676.84 1662.84
3 LAyer of Rowin
B
B
0
400.00
F
DETAIL F SCALE 1 : 5
A
A
Shell B Top
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
1622.80
G
B
B
76.20
A
A
S4
DETAIL G SCALE 1 : 1
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
1646.32
H
B
B
76.20
A
A
S3
DETAIL H SCALE 1 : 1
6
5
4
3
2
1
6
5
4
3
2
1
ITEM NO. 1 2
PART NUMBER
MILD STEEL MILD STEEL DESCRIPTION
QTY.
16 64
bracket A bracket support
D
D
2
C
C
1
B
B
60.00
A
A
bracket assembly'
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
B
B
6.00
57.00
A
A
Bracket Support
6
5
4
3
2
1
6
5
4
3
2
1
D
D
200.00 170.00
100.00
30.00 0
C
C
0
B
B
15.00 85.00 15.00X4Slot
300.00
A
A
Bracket A
6
5
4
3
2
1
6
5
4
3
2
1
D
D
C
C
M18X2.5 BOTH SIDE
40.00
73.3
20.00
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
WT105052003XXXX-03 ROTOR SECTION ARM SUPPORT A
NAME
SIGNATURE
DATE
TITLE:
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT105052003
ALLUMINIUM
EST WEIGHT: 2.56KG
Quantity : 3 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
73.4
D
D
M18X2.5 BOTH SIDE
20.00
C
C
40.00
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 03
WT105052003XXXX-06 ROTOR SECTION ARM SUPPORTB
NAME
SIGNATURE
DATE
TITLE:
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT105062003
ALLUMINIUM
EST WEIGHT: 2.56KG
Quantity : 6 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
119.30
D
D
109.00
C
C
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 01
WT109012001XXXX-01 TOP SECTION MAIN SHAFT 60D
TITLE:
NAME
SIGNATURE
DATE
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
WT109012001 A4
STAINLESS STEEL SUS 304
EST WEIGHT:18.9KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
18.00
D
D
100.00
TAP M12
200.00
TAP M12
C
C
150.00
TAP M12
TAP M12
37.50
0
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 01
WT109022001XXXX-01 TOP SECTION COUPLING A60-40
TITLE:
NAME
SIGNATURE
DATE
DRAWN CHK'D APPV'D
12.00
MFG Q.A
A
A
DWG NO.
MATERIAL:
WT109022001 A4
STAINLESS STEEL SUS 304
KEY 8x11X105 KEY 12X8X80
EST WEIGHT:9.39KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
40.00
D
D
30.00
M18X2.5
C
C
44.45
B
B
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 01
WT105022001XXXX-018
NAME
SIGNATURE
DATE
TITLE:
ROTOR SECTION T-JOINT SIZE40
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT105022001
ALLUMINIUM
EST WEIGHT: 0.24KG
Quantity : 18 unit
SHEET 1 OF 1
6
5
4
3
2
1
6
5
4
3
2
1
130.00
D
D
PCD 104.00
C
C
46.00
B
B
80.00
DEBURR AND BREAK SHARP EDGES
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR:
FINISH:
REVISION: 01
WT109052001XXXX-01 GEARBOX SECTION BEARING HOUSING
TITLE:
NAME
SIGNATURE
DATE
DRAWN CHK'D APPV'D
MFG Q.A
A
A
DWG NO.
MATERIAL:
A4
WT109052001
ALLUMINIUM
EST WEIGHT: 0.689KG
Quantity : 1 unit
SHEET 1 OF 1
6
5
4
3
2
1
GROUND STRUCTURE
ASSEMBLY DRAWING
PRODUCTION OF THE SYSTEM
PRODUCTION OF THE SYSTEM
Our facility uses in-house powder coating and galvanizin on all metal parts. This process is designed to enhanc durability and provide protection against weather-relate damage. By preventing rust, we ensure that the meta parts have a longer lifespan and maintain their quality over time.
PRODUCTION
of the SYSTEM
MONITORING INTELLIGENCE
of the SYSTEM
We can monitor the Vertical Axis Wind Turbine System with the technology we built, thanks to our in-house control box product. With the Apps, the user can monitor the system's performance and energy generated throughout the time.
CARBON CREDIT
Apart from being cost-effective, there is an additional benefit to wind turbine energy generation.
Trading on the carbon credit exchange can convert a smaller carbon footprint into money. The saved quota can be sold to users who have exceeded their carbon production limit.
For every 2,200kW, you can trade 1 carbon credit with a value of USD 120 or more.
The utilization of green energy offers numerous benefits. It not only promotes environmental sustainability but also contributes to economic value by reducing costs and creating new employment opportunities. Furthermore, green energy investments often yield long-term benefits, such as increased energy independence and a reduced reliance on fossil fuels.
TECHNOLOGY READINESS LEVEL (TRL) Ourtechnologyreadiness level(TRL)of9, a clear indication of our system's readiness, demonstrates that it has been proven to excel in real-world operational environments. We proudly confirm that our TRL meets all requirements and extend a warm invitation to any interested party looking to conduct tests on our system.
Scrap and tear-down requirements, waste management compliance. Metal parts: All metal in the system can be recycled, processed, and made into a new material. Recycling metal has advantages, including environmental benefits and energy savings. Fiberglass parts: There are three main processing methods for recycling fiberglass: grinding, incineration, and pyrolysis. The most obvious one is grinding. The material is chopped into small pieces and then shredded into small pieces or powders for reuse in other products.
As part of our commitment to supporting innovation and validating real-world performance, we are pleased to offer the first wind turbine unit at no charge for this pilot project. This initial deployment will allow both parties to evaluate system performance, site suitability, and operational benefits under actual conditions, forming the basis for potential wider-scale implementation following the successful completion of the pilot phase.
ELQUATOR WIND TURBINE SDN BHD (1386153-P) No 16, Jalan P2/18, Seksyen 2, Bandar Teknologi Kajang, 43500 Semenyih, Selangor, MALAYSIA Tel: +6(03)87260207 www.elquatorwindturbine.com www.elquator.com www.elquatorsmartenergy.com
THANK YOU
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112Made with FlippingBook - professional solution for displaying marketing and sales documents online