Lightweight Body Filler An economical Lightweight Body Filler offering smooth and creamy tex- ture that spreads easily for excellent feather edging. Adheres to galva- nized, aluminum and bare steel. Sands easily and won’t load up sand paper. Great for a general use body filler.
Part # 4401 4404
Description
Size
Lightweight Body Filler Lightweight Body Filler
Gallon Quart
Substrates & Prep Clean surface removing dirt, wax, grease & oil. Grind away any corrosion or rust using 36 or 40 grit grinding disc. Rough sand substrate no finer than 80 grit paper. Mixing 50 Parts Lightweight Body Filler 1 Part RED OR BLUE Cream Hardener
50:1
As a general rule, scoop appropriate amount of body filler for a single application on a non porous surface. Drawing a straight line across the widest points of body filler “puddle” will provide the 50:1 mix ratio needed for proper catalyzation. Do not whip air into mixture, stir in circular motion. Application Apply thin layer using firm pressure to ensure proper adhesion. Apply additional layers building slightly higher and larger to allow for sanding. Repeat process as necessary. Drying
Gel Time Approximately 4 to 7 minutes Sand Time Approximately 15 minutes Recoat
Allow 1 hour cure time before coating with primer or sealer.
Master Tips Do not return unused catalyzed portion to filler can. Allow for extended flash off time if wax & grease remover used on filler.
Page 9
Made with FlippingBook flipbook maker