AutoBody Master

Premium Lightweight Body Filler Truly a premium body filler that’s tack free, self etching, and stain resist- ant. Formulated with finest resins available to offer superior spreading and sanding properties. Self etching body filler adheres to steel, alu- minum, zinc, and galvanized metals.

Part # 4450

Description

Size

Premium Body Filler

Gallon

Substrates & Prep Clean surface removing dirt, wax, grease & oil. Grind away any corrosion or rust using 36 or 40 grit grinding disc. Rough sand substrate no finer than 80 grit paper. Mixing 50 Parts Body Filler 1 Part BLUE Cream Hardener

50:1

As a general rule, scoop appropriate amount of body filler for a single application on a non porous sur- face. Drawing a straight line across the widest points of body filler “puddle” will provide the 50:1 mix ratio needed for proper catalyzation. Do not whip air into mixture, stir in circular motion. Application Apply thin layer using firm pressure to ensure proper adhesion. Apply additional layers building slightly higher and larger to allow for sanding. Repeat process as necessary. Drying

Gel Time Approximately 4 to 7 minutes Sand Time Approximately 15 minutes Recoat

Allow 1 hour cure time before coating with primer or sealer.

Master Tips Do not return unused catalyzed portion to filler can. Allow for extended flash off time if wax & grease remover used on filler.

Page 10

Made with FlippingBook flipbook maker