2K Glazing Putty A two part glazing and finishing putty offering super smooth texture, fast dry, and no shrinkage. Excellent adhesion properties allows you to apply directly to metal, body filler, fiberglass and cured topcoats to fill minor imperfection.
Part # 4724
Description
Size
2K Glazing Putty
24 oz Tube
Substrates & Prep Clean surface removing dirt, wax, grease & oil. Grind away any corrosion or rust using 36 or 40 grit grinding disc. Finish sand with 180 grit before applying putty. Mixing 50 Parts Glazing Putty 1 Part BLUE Cream Hardener
50:1
As a general rule, scoop appropriate amount of body filler for a single application on a non porous sur- face. Drawing a straight line across the widest points of body filler “puddle” will provide the 50:1 mix ratio needed for proper catalyzation. Do not whip air into mixture, stir in circular motion. Application Apply thin layer using firm pressure to ensure proper adhesion. Apply additional layers building slightly higher and larger to allow for sanding. Repeat process as necessary. Drying
Gel Time Approximately 2 to 3 minutes Sand Time Approximately 15 minutes Recoat
Allow 1 hour cure time before coating with primer or sealer.
Master Tips Do not return unused catalyzed portion to filler can. Allow for extended flash off time if wax & grease remover used on filler.
Page 12
Made with FlippingBook flipbook maker