AutoBody Master

Acrylic Sealer Ready to spray acrylic sealer for faster topcoat coverage and better color holdout. This sealer is fast drying, easy flowing and provides a uniform color that’s satin smooth. Gray

Part # 8430 8431

Description Acrylic Sealer Acrylic Sealer

Size

Gallon Quart

Substrates Fully Cured Finishes: Sand with 240-320 grit paper Steel, Galvanized & Aluminum: Pre Coat with Super Etch or Etch Fill Self Etching Primer Fiberglass & SMC: Sand with 150-240 grit paper Mixing Ready To Spray Set Up Tech Info Tip/Needle: 1.3mm to 1.5mm Spot Air Pressure: 35 - 45 psi / HVLP 5 to 10 psi at cap Overall Air Pressure: 45 - 55 psi / HVLP 5 to 10 psi at cap Viscosity: #2 Zahn 19-20 seconds Film Build: .05 mils / full wet coat Coverage (@ 1 mil) 387 sq. ft. @ 1 mil Application Apply 1-2 medium coats @ 40-50 psi allowing 10-15 minutes between coats.

Drying Topcoat Recoat

20-30 minutes 30 minutes

Sand Time 30 minutes Pot Life Indefinite - Stir thoroughly

Physical Data Volume Solids RTS

24.1%

Pot Life: VOC RTS:

Indefinite

4.6 lbs/gallon

Master Tips Acrylic Sealer must be mixed well before use. If sealer is allowed to dry for more than 48 hours, scuff sand and reapply 1 coat of sealer before topcoating. Film build, temperature, and humidity will affect dry times.

Page 27

Made with FlippingBook flipbook maker