EuroClear Formulated and designed for applications that require the premier gloss and depth that only European clears deliver. EuroClear is a premium appearance product that exhibits flow and leveling second to none for a glass like finish in either air dry or forced dry conditions. EuroClear exhibits excellent weathering, stone chip & abrasion resistance. Part # Description Size 9050 EuroClear 5 liter 9060 Fast Catalyst 2.5 liter 9070 Medium Catalyst 2.5 liter 9085 Slow Catalyst 2.5 liter Substrates
Apply over basecoats, catalyzed enamels or urethanes. Follow basecoat mfg prep recommendations. Mixing 2 parts EuroClear 1 part EuroClear Catalyst Up to 10% urethane reducer can be added if desired. Set Up Tech Info Tip/Needle: 1.3mm to 1.5mm Spot Air Pressure: 35 - 45 psi / HVLP 5 to 8 psi at cap Overall Air Pressure: 45 - 55 psi / HVLP 6 to 10 psi at cap Viscosity: #2 Zahn 27-30 seconds Film Build: 1 - 1.4 mils per full wet coat Coverage 685 sq. ft. @ 1 mil / gallon Application Apply 2-3 full wet coats with 10-15 minutes flash between coats. Drying Air Dry Dust Free 15-20 min Tack Free 30-45 min Sand Time 16-24 hours Recoat 16-24 hours Pot Life 2-4 hours Force Dry - Purge for 15 to 20 minutes, 40 minutes at 140° F. Sand 1 hour after cool down Recoat 1 hour after cool down Buffing If necessary, sand with 1500 or finer grit paper after 16 hours. Buff with appropriate compound after 24 hours. Buffing is easiest when done within the first 48 hours following application.
Physical Data Volume Solids RTS
41.5 - 43.5% 2-4 hours 4.2 lb./gallon
Pot Life: VOC RTS:
Humidity Resistance: Salt Spray Test:
Excellent Excellent
Master Tips If problem occurs during application, painter must get a minimum of 2 coats on vehicle before stopping for repair or additional recoat. Allow to dry overnight, then scuff before primer, color or clear application. Retard in extreme heat or humidity. Accelerate in shop temps below 70°F.
Page 34
Made with FlippingBook flipbook maker