HELPFUL TIPS Shuffle Palio Express planks or tiles when removed from the packaging for a more natural look. Stagger joints with a minimum distance between the factory cut ends being equal to the width of the plank or tile. Korlok & Palio Rigid tips • Check whether you start your first row with a full plank or tile width. You don’t want your last row to be too narrow. Ideally, neither the first nor the last row should be cut smaller than half a plank or tile width. • Remember to leave a 5mm expansion
AFTER CARE Regular cleaning with Karndean Clean (or a pH neutral cleaner) will help keep your floor looking its best. Using Karndean Clean on your floor helps to break up and safely remove any germs that are on the surface, in the same way as using soap for washing your hands. 1. With a soft sweeping brush, remove any loose dirt or dust. 2. Add 50ml of Karndean Clean (1 notch represents 50ml) to approximately 8-10 litres of clean water. 3. Mop the mixed solution over the entire floor, removing any excess liquid. 4. Allow your floor to dry. To maintain the look and feel of your floor, make sure to use our 'remove and refresh' cleaning system every 6 to 12 months: • Karndean Remove helps to prepare your floor before applying Karndean Refresh. • Karndean Refresh creates a satin finish to your floor and helps protect it from marks and fine scratches.
gap around the room and any fixed objects. Finish your installation with a colour matched waterproof scotia.
• Korlok joins should be smooth to touch and almost invisible - where necessary, use a pull bar. • Be sure to cut the correct end to fit tongue to groove. • Stagger joints - no corners should ever meet. • Korlok herringbone - find the center of your room, or the central point when running continuously between rooms, to centralise the design. Palio Looselay tips • Undercut the plank or tile to get a sloping edge to ensure a tight fit to the perimeter of the room. Factory edges should be fitted together when joining planks/tiles. • Fit planks and tiles tight to each other and the perimeter of the room. • When cutting the end of a row, be sure to fit the factory cut end against the factory cut end. • Once you've decided which way your planks or tiles will run, work out how
many plank or tile widths fit across the room to ensure you don’t finish with a narrow piece. This will enable you to adjust the width of your first run to make it more balanced.
50 PALIO EXPRESS BY KARNDEAN
Made with FlippingBook - professional solution for displaying marketing and sales documents online