Product Information
We have produced this product section to help you with your purchasing decision. For further information please contact your local stockist, details of which can be found at www.merlynshowering.com
Product information
Information and maintenance Always read the instructions on the packaging, chrome is vulnerable to acid attack and some strong household cleaners including strong disinfectants, denture cleaners, hair dyes, wine making chemicals and photographic chemicals may contain acid. These materials may have a varying effect on the surface from black spots/streaks (which cannot be removed) to pitting the surface. Contact with these materials should be avoided.
Adjustment This is the min and max adjustment of the actual enclosure. These are the adjustment dimensions of the actual door excluding the tray. Therefore, these are the dimensions to follow when installing a enclosure in a wetroom application without a tray. The guide below may be helpful in taking measurements to determine the shower door or enclosure size required. Dimensions given in this publication are in millimetres, are approximate and may vary with adjustment. They are subject to change without notice. Please note that when a tray is tted it is essential that the tray is level before any doors or enclosures are tted.
All products are manufactured in accordance with EN14428 and utilise toughened safety glass to EN 12150. All shower trays are manufactured in accordance with EN14527. All doors feature adjustable wall pro les to compensate for out-of-true walls and have micro adjustment features for ne tuning to obtain a perfect t and operating action. All enclosures, wetrooms and panels are Power Shower approved – will retain water under normal showering conditions. Water retention is maintained in all products under normal showering conditions. A selection of MERLYN enclosures are frameless in design. Spray/mist may escape therefore we would recommend use of these enclosures with tiled oors. Opened cartons can not be returned. Returns carry a £40 box charge or £60 per unit where the sale is less than 30 days old. Returns over 30 days old will not be accepted. All products are supplied complete with full installation instructions and the necessary xings. Check with your dealer for accurate matching of material samples. Product descriptions do not imply the use of precious or valuable materials. Our policy of reviewing product design and development on a regular basis means MERLYN reserve the right to change product speci cations and prices without notice. Only shower enclosures, panels, Truestone shower trays and bath screens are covered by the Lifetime Guarantee. Please contact the MERLYN sales team for more details. Glass shattering and parts subject to wear are not covered by the Lifetime Guarantee. For full details on all product ranges please contact MERLYN Showering on 0808 1011429 or log onto www.merlynshowering.com.
Important shower tray information
It is up to the designer or installer to ensure that the tray and enclosure combination is arranged in such a way that water retention meets the customers needs. » The waste has the capacity to carry away 29L/Min. High powered systems may exceed this. Please check with the manufacturer. » Please ensure that the shower head is not positioned directly over the waste as this may restrict water ow rate. » Please ensure that the colour and size of shower tray are as per your order before installation. » You must inspect the product thoroughly before installation. Fitting the product is acceptance of quality. » The trays are handmade from natural material. Please allow for height variances due to manufacturing tolerances. » For open ended shower screens please consult your installer. » Shower trays must be tted as per the tting instruction. Deviation from the pre installation checks or tting installation will void the guarantee. » When wet, the surface of the majority of shower trays will show an increase in the potential for slipping. This is particularly the case when soap, shampoo, bath oil etc. are used. It is important that designers, installers and users are aware of this. Important Although shower door and enclosure sizes are related to tray sizes it is important to note that most shower trays are tiled down to the rim, often over an ‘up-stand’. The nished installation space may be less than the nominal tray size. MERLYN shower units are made to suit this remaining space.
Recess Location
Take the measurements after the tray is installed and the walls are tiled.
High
Mid
Low
Recess Location
Corner Location
Wall Location
Quadrant Location
Bath Screens » MERLYN Bath Screens are not designed to t on baths with stepped fronts, roll top rims or integral soap dishes. » Fitting of screen on baths which have raised head rests or shapes is not recommended. » There must be no items causing obstruction with the seal and bath, as any of the above may cause leaks. » When choosing your Bath Screen, please ensure that if your bath has bath handles, they do not interfere with the bath rim area where your screen will be placed. » When choosing an in-swing or folding Bath Screen, please ensure your swing area is not interfering with any brassware or internal shower features. Similarly, when choosing an out–swing, please ensure the out-swing area is free from any obstructions. » It is recommended the shower head position is situated on the same wall to which the Bath Screen is xed and in the centre of the shower area.
Trays shown in this catalogue are for illustrative purposes only.
Images are for illustration purposes only. The colours and nishes shown in the catalogue are as accurate as possible within the limits of the printing process. The positioning of all showering heads in the brochure is for illustrative purposes only. All descriptions, speci cations and particulars contained in this brochure are intended merely to represent a general idea of the products described herein and none of these form part of any contract to give rise to any independent or collateral liability upon the company. Cleaning » It is important to clean your MERLYN shower door and tray after every use. Wipe down all the glass and metal parts with a soft cloth.
Tray Finish min-max
The Tray Finish applies when tting a door and a tray. These are the minimum and maximum dimensions that a
shower door or enclosure will t using standard wall pro les.
» Do not allow lime scale to build up in hard water areas.
Tray nish To nd the correct Tray Finish dimension: In a recess: Measure from the nished, tiled wall to the opposite nished, tiled wall. In a corner: Measure from the nished, tiled wall to the edge of the tray.
» Ensure that any residual water on the glass is removed after every use.
» Clean the glass regularly using soapy water.
» Do not use abrasive products on any surfaces.
» Install the enclosure in a well ventilated area.
If the wall/walls are leaning in, this will further reduce your Tray Finish.
Note:
152
Product Information
Made with FlippingBook - Online Brochure Maker