Technical (A-Z)
Taurus Columbine
Water Content (L)
Weight (KG)
Overall Projection (mm) +/- 2mm
Number of Bars
Pipe Centres (mm) +/- 2mm
Pipe Centres from Wall (mm) +/- 2mm
Product Code
RXTA-0960500 RXTA-0960665
6.7
7
395 minus valves 92 530 minus valves 92
N/A N/A
230
7
7.5
230
Tinto
Water Content (L)
Weight (KG)
Overall Projection (mm) +/- 2mm
Number of Bars
Pipe Centres (mm) +/- 2mm
Pipe Centres from Wall (mm) +/- 2mm
Product Code
RXTN-0800500
3.6
6
450 550 450 550 450 550 750
60-70 60-70 60-70 60-70 60-70 60-70 60-70
75-85 75-85 75-85 75-85 75-85 75-85 75-85
16 16 24 24
6.8 8.9
RXTN-0800600 4.1
RXTN-1200500 RXTN-1200600 RXTN-1500500 RXTN-1500600
5.4 6.1 6.7 7.7
10.2 12.2 13.8
30
30
RXTN-0600800 4.1
6.8
13
Vertica D
Water Content (L)
Weight (KG)
Overall Projection (mm) +/- 2mm
Number of Bars
Pipe Centres (mm) +/- 2mm
Pipe Centres from Wall (mm) +/- 2mm
Product Code
RXVD-1500535 RXVD-1800535
17.8 21.1
27.5 32.5
Width plus valves 71 Width plus valves 71
130 130
10 10
Visit our website for techincal drawings and ĕtting instructions
Disclaimer
Radox Radiators Ltd provides wall plugs and screws that are only suitable for ĕtting on concrete and brick walls. Our wall plugs and screws are designed to be used exclusively for the purpose of ĕtting radiators and towel rails. It is the responsibility of the ĕtter to ensure that the wall is suitable for the installation of our products and to determine if any additional support or ĕxings are required. Radox Radiators Ltd accepts no liability for any damage or injury that may occur as a result of the ĕtting of our products on an unsuitable wall. By using our wall plugs and screws, the ĕtter assumes full responsibility for the installation and any associated risks. The mild/carbon steel radiators are for use on closed heating systems only; they are NOT suitable for installation on secondary (open/domestic hot water) circuits. After installation, the entire system must be thoroughly cleaned and Ėushed to remove any remaining residues, followed by dosing the system with a suitable water treatment solution to prevent corrosion, in accordance with BS 5449: 1990, BS EN 12828: 2003 and BS 7593: 1992 The Stainless-Steel radiators are made from highly polished, 304 grade solid stainless-steel, which oĔers a high resistance to corrosion and are suitable to use in most types of heating systems.
88
Made with FlippingBook Ebook Creator