WC FRAME
FLOW REGULATORS
JTP offers a range of affordable water saving devices and flow regulators to help you use water more economically.
Flow regulators control the flow of water by responding to signals generated by independent devices like flow meters or temperature gauges fitted inside showers and taps. They are manufactured using certified materials to avoid splash and maximize water and energy savings. There are so many reasons we need to be mindful of our water usage – the huge demands placed on our water supplies have caused the government to launch legislation regulating the flow of water supplied by taps and showers in new homes. Equally, we all want to be kinder to the environment by using water efficiently to contribute to a greener future. Conserving water is good news for both the planet and our pockets, as reducing water consumption helps us to save money on household bills.
Supplied Support brackets Support bolts M10 x 65 long square neck dome Head screws M10 nuts and washers Steel plate Screws Wall plugs Wall brackets
All of our water saving devices and flow regulators conform to new legislation and come with Water Regulation Advisory Scheme approval to reassure you of their eco credentials.
For wall hung pan/bidet SUPPORT SET 1526 £120.00
Supplied 1 x WC frame 1555 8 x 12mm plastic plugs 8 x 13mm AF screws
LP 0.2 - 0.2 bar pressure MP 0.5 - 0.5 bar pressure
(very low pressure) (medium pressure)
HP 1 - 1 HP 2 - 2 HP 3-5 - 3
bar pressure bar pressure bar pressure
(high pressure) (high pressure) (high pressure)
For wall hung toilet/pan only WC Frame 1555 £150.00 2 x Chrome cap covers 2 x 12mm nylon nuts and sleeves 4 x 12 mm metal nuts 8 x Washers 2 x Fixing plates 2 x 12mm threaded bolts 1 x No.5 Allen key
Please refer to this pressure guidance on each of our products
All the below constant flow controls reduce dynamic pressure avoiding splash and maximise the water/ energy saving and system balancing. They are produced from materials which have certification meeting the requirement of BS5490 “Materials for use with contact to potable water”
SHOWER REGULATORS
AERATOR CONVERTER KITS
A shower regulator suitable for shower applications. Should be connected to the inlet of the hose. Available in flow rates circa 6.0 litre, 8.0 litre, 10.0 litre or 12.0 litre
Aerator converter kit suitable for most screwed spout outlet connections replacing the current stream straightener. Available in 1.7 litre spray wash hand basin, 3.5 litre aerated column general basins or 5.0 litre
Florence cistern lever 5551 £52.60
aerated column FL2 £8.60
FL1 £9.50
Economy shower regulator suitable for accurate flow control to mains pressure feed systems only. Can be fitted in any 1/2” flat face connection, shower hose or flexible tap connectors. Come complete with integral gasket. Available in 6.0 litre, 8.0 litre, 10.0 litre or 12.0 litre flow rates FL4 £4.00 ECONOMY SHOWER REGULATORS
Constant flow regulator suitable for insertion into the 1/2” inlet connection of taps manufactured to BS5412 Type 2 connection (pillar taps). Available in 2.0 litre minimum, 4.0 litre minimum CONSTANT FLOW REGULATORS
FL3 £4.00
JTP
283
282
JTP
Made with FlippingBook Ebook Creator