Summer heating elements
Matt Black (MB)
Brushed Brass Effect (F)
Slate Effect (T)
Matt White (MW)
Brushed Bronze Effect (BZ)
Electric Elements Supplied with a Pipe Masking Cover IP54 rated These elements can be used in an all electric installation, we do not offer this service See page 145 for other element details.
Electric Element T Piece Compatible with matching coloured Electric Elements WRT1C29M5
400W Element Please note, the control fascia may not be the same finish as the casing. Brushed Bronze has a Black fascia. Slate has a Silver fascia. All others match. ELE400MB
600W Element Please note, the control fascia may not be the same finish as the casing. Brushed Bronze has a Black fascia. Slate has a Silver fascia. All others match. ELE600MB
£15
£155
£155
WRT1C2916
£15
£155
£155
ELE400MW
ELE600MW
WRT1C2BRA
£18
£180
£180
ELE400F
ELE600F
WRT1C2CBR
£18
£180
£180
ELE400BZ
ELE600BZ
WRT1C2RAW
£18
£180
£180
ELE400T
ELE600T
Also known as dual fuel or dual energy. Connected to a central heating circuit and including an electrical element that allows operation in summer months when the central heating is not in use. All Crosswater towel rails are suitable
Electric Element
for use with a summer heating element, except MPRO Electric models. Refer to page 206 for wattage required per model.
300W RADX350
£120
600W RADX700
£140
IMPORTANT NOTE Please refer to the bathroom zone diagram when using electrical components within the bathroom environment, see page 207. The summer element is equipped with a thermal fuse that will cut out at 65°C, with a total shut down safety setting at 78°C. These elements are suitable for all Crosswater towel warmers, where an element can be fitted. Heating elements comply with BS EN60335-2-73:2003
147
*Subject to online registration.
Made with FlippingBook Digital Proposal Creator