Apartment Locker
Amazon Hub Apartment Locker is a package management solution that comes in two different configurations - Indoor or Outdoor. In the initial stages, Amazon will ask Apartment Locker.
Key Features • P
Size Sizing is the same Indoor or Outdoor. These are minimum size estimates; actual locker sizes will vary based on property layout.
• cases where a property has 2 systems, each unique resident will only have access to their designated locker Placement • Pick a location within 300’ of your current USPS mailbox location • away from your current mailbox location • Select a location that is easily accessible by package carriers & residents • • • System can either be indoor or outdoor – outdoor systems don’t need structures built over them Indoor Systems • Can be placed in “L” or “U” shapes if needed • If lockers are on adjacent walls, electrical and data port will be required for standalone expansion segments • Amazon will provide a minimum of 2 interior anchors for each locker section under 18’. Important Clearance Measurements: • Side: 2” on each side of locker system (i.e. a 9ft locker needs 9’-4” of width) Location should be flat and stable concrete - slope can have <=2" rise or fall • • • Height: System is 6’-9” + 3” clearance above Electrical/Network • • Cannot share circuit with other systems that utilize a compressor (typi- cally vending machines) • Input voltage: 120 AC @ 60 HZ 8.0A • • Optional: Make your Indoor Apartment Locker cellular ready. There is a one-time cost to updagrade. Front: 36" clearance between the front of the Apartment Locker and any other obstacle; 48" clearance required in California Back: 2" of space between back of locker and end of system (total depth 25") Data port if cellular upload and download speeds are not at least 1 Mbps roperties can have more than one Apartment Locker, for instance, for a 500+ unit Garden-style property it might be more convenient to your residents to have a multiple locker system throughout the property
Price Estimate*
Total Compartments
Indoor w/ Cellular Modem
Unit Count Recommended Locker Size
Indoor
Outdoor
1-60
6’ 9’
22 45 68 91
$9,500 $11,100 $11,500 $12,000 $13,700 $14,500 $14,500 $16,300 $17,500 $17,000 $18,900 $20,500 $19,500 $21,500 $23,500 $24,500 $26,700 $29,500 $27,000 $29,300 $32,500 $29,500 $31,900 $35,500 $32,000 $34,500 $38,500
61-120
121-184 185-248 249-313 314-377 378-441 422-506 507-570
12’ 15’ 18’ 24’ 27’ 30’ 33’
114 140 163 186 209
*Price does not reflect any local tax and will depend on final layout
Outdoor Systems
• A structure will not need to be built around them, they are weatherized and have drainage systems • Surface: Concrete - the system will be bolted into the surface, concrete pad thickness will be specified on installation guide • The system has a lighting structure - to minimize issues with residents, consider a location that will limit the light shining into residential units. Consider the safety of users when standing at the Apartment Locker – avoid close proximity to drive lanes • Close proximity to electrical disconnect box (cannot be installed on or behind locker). Cannot be within 5’ of propane tanks and other combustible items Important Clearance Measurements: • • Front: 36” clearance between the front of the Apartment Locker and any other ostacles (unless located in CA then clearance is 48”) Side: 8” on each side of the locker system to allow room for bracing brackets (i.e. a 9’ locker needs 10’-4” of width) • Back: 5” from any walls or other structures to ensure adequate air circulation. If the Apartment Locker is installed on asphalt, it must sit within 5” of a sturdy wall, made from a material that isn’t stucco. The required support brackets will be bolted into the wall. • Height: clearance is 7’- 5 ” - structure is 7’-0”+ 5 ” for cellular antenna on top of Starter Apartment Locker. • Freestanding lockers require at least 8" on back and each side of locker Electrical/Network • Hard-wired connection 840 Watt (max); 125 Watt (regular) • Input Voltage: 120 AC @ 60Hz 8.0A • Cannot share circuit with other systems that utilize a compressor (typi- cally vending machines) • 20A dedicated circuit with standard breaker disconnect. Disconnect • Cellular (no data plan is required) • An electrician needs to return once the Apartment Locker is installed to complete final hookup.
Made with FlippingBook - Online magazine maker