TROUBLESHOOTING GUIDE
Problem
Probable Cause
Remedy
Game does not start It will play one game at power on, but no more. Can ’ t change the number of players
Start Switch on front switch panel defective. Pinched, broken, or disconnected wiring.
Replace Start Switch. Part # AAPB25501 Refer to “ How to Replace Switch in Front Switch Panel ” Refer to wiring diagram and check cables from switch to Main Board. (CE25507, CE25506)
Players Switch on front switch panel defective. Pinched, broken, or disconnected wiring. Players Switch on front switch panel defective. Pinched, broken, or disconnected wiring. Unplugged from wall. On/Off switch disconnected or faulty. Faulty Power Supply Pinched, broken, or disconnected wiring. Ensure Main Board Assembly is receiving 5 Volts DC Faulty Main Board USB communication cable between Main Board and Display Board unplugged or faulty. Check for blinking green LED on the Main Board Pinched, broken, or disconnected wiring. Faulty Display Assembly
Replace Players Switch. Part # AAPB25501 Refer to “ How to Replace Switch in Front Switch Panel ” Refer to wiring diagram and check cables from switch to Main Board. (CE25507, CE25506) Replace Players Switch. Part # AAPB25501 Refer to “ How to Replace Switch in Front Switch Panel ” Refer to wiring diagram and check cables from switch to Main Board. (CE25507, CE25506) Ensure the game is plugged into the wall outlet. Ensure On/Off switch is switched on, and power supply receiving 110 Volts AC. Check for 5 Volts DC from Power Supply. Replace if needed. Part # AAPS25500 Refer to wiring diagram and check cables from wall outlet to Main Board. (CE25509, AAPS25500) Measure 5 VDC at AAPS25500 connector on Main Board. Green LED should be blinking rapidly.
Can ’ t change the game type
Game is not on.
Refer to “ How to Open Electronic Area ” to access items to check.
Replace Main Board if needed. AAMB25501
Lights on the game are on, but no display and the game can not be played Refer to “ How to Open Electronic Area ” to access items to check.
Verify USB cable plugged in and secure to the correct bottom socket on Main Board. Replace cable if needed. Part # A5CBL5900
If green LED is blinking, Main Board is usually not the issue. Refer to wiring diagram and check cables from Display to Main Board. ( 5 VDC on CE25503, A5CBL5900) Replace Display Assy if needed. Part # AACB25505
Display is not on
Game can be played, but no display.
Faulty Display Assembly. Refer to “ How to Access Display ” Replace Display Assy Part # AACB25505
Display is very dim, and does not show everything
Pinched, broken, or disconnected wiring. Faulty Display Assembly.
Check 5 Volt DC input to Display Board ’ s red and black wires. Cable # CE25503 Replace Display Assy Part # AACB25505
7
Made with FlippingBook flipbook maker