Skee-Ball Premium+ Full Service Manual

TROUBLESHOOTING GUIDE

Problem

Probable Cause

Remedy

Display always shows “ Loading ”

USB communication cable between Main Board and Display Board unplugged or faulty. Check for blinking green LED on the Main Board Verify Micro SD card is fully seated. Faulty Display Board

Verify USB cable plugged in and secure to the correct bottom socket on Main Board. Replace cable if needed. Part # A5CBL5900

If green LED is blinking, Main Board is usually not the issue. Replace Main Board if needed. Part # AAMB25501 Replace Micro SD card if needed. Part # AASD0008A - HSBP Replace Board Assy if needed Part # AAMB25501

Alley Carpet and Score Rings are Dirty

We recommend cleaning with “ Scrubbing Bubbles ”

REPLACING GUTTER BALL SWITCH

The gutter switch is located below the playfield.

If the gutter switch is faulty, it will have to be re- placed.

Instructions:

Remove the 1 screw from the left cover using the #2 square bit included in the hardware kit. (Part # A5DBSQ020)

Lift out the wood panel to access the score switch.

8

Made with FlippingBook flipbook maker