HOW TO REPLACE SWITCH IN FRONT SWITCH
Front Switch Panel is located on the front right side of alley.
If a push button is faulty, it will have to be replaced.
Instructions: Remove the 14 screws from both sides along the length of the right side cover using the #1 square bit included in the hardware kit. (Part # A5DBSQ010)
Flip the side rail upside down to access the push but- tons.
A single push button can now be replaced by unplugging the button and unscrewing the large nut on the push button. Single Push Button Part # AAPB25501
If you wish to replace the entire push button assem- bly, unplug all 4 push buttons and remove the 2 nuts using a 11/32” wrench.
The cables are labeled to ensure the new push button assembly can be plugged in correctly.
Entire Push Button Assembly is Part # AAPB25500
9
Made with FlippingBook flipbook maker