brochure in-lite - EN - 2019

SYSTEM / SYSTEM PARTS

The in-lite cable in-lite has two types of cables in its product range, the 14/2 and the 10/2. The 14/2 cable can have a maximum cable length of 40 meters, while the 10/2 cable has a maximum cable length of 80 meters. The maximum cable length is calculated per branch from the transformer and it is not necessary to add up the various lengths.

in-lite outdoor lighting is based on low voltage (12 volts). Our lighting is safe and easy to install, customize and expand. Any landscaper or handy consumer can and is allowed to install in-lite lighting. The transformer The transformer converts the 100-230 volts from the power outlet to 12 volt AC voltage. The transformer controls the lighting using a light-sensitive sensor. A motion detector is also available as an accessory*. The in-lite low voltage cable runs from the transformer to the yard, where the lights are connected. Depending on the type of transformer used, one to three cable entries is available. First and foremost, choose a transformer based on the possibilities and your preferences. For ultimate user- friendliness, such as control using an app or individually controllable zones, opt for the SMART HUB-150. If you prefer to keep things simpler, choose the HUB-50 or HUB-100. The following chart shows you the differences at a glance. Apart from the desired options, it is important to choose a transformer that has a sufficient output wattage, one that fits your lighting plan. Every fixture has a specific VA value (i.e. volt-amperes), which is also referred to as the installation value. This is the output wattage required by the transformer for the light to function.

Want to read more about the cable and maximum cable lengths? Go to in-lite.com/cable

* The MOVE motion detector is available for the HUB-50 and HUB-100 The SMART-MOVE motion detector is available for the SMART-HUB

How do I determine which transformer is the right one for my lighting plan?

Add up the total VA value of every fixture in your lighting plan. This value can be found on the back of the packaging and on our website under product specifications. The value may not exceed the load capacity, as indicated in the below chart. You can use several transformers if necessary.

Want to read more about determining the right transformer? Go to in-lite.com/transformer

CBL-056/M

CBL-081/M

HUB-50

HUB-100

SMART HUB-150

Available output wattage

50 VA

100 VA

50 VA

100 VA

150 VA

3, controlled separately using an app

Number of cable entries

1

1

2, jointly controlled 2, jointly controlled

Touch screen operation

X

X

V

V

N/A

App control

X

X

X

X

V

Light sensor

V

V

V

V

N/A

Internal clock

X

X

X

X

V

Motion detector support

X

X

V

V

V, wireless

Incorrect installation indication

X

X

V

V

V

102

Made with FlippingBook - Online magazine maker