CLINICAL CASE, DR. AMON GABRIEL SANDER, SCHRUNS, AUSTRIA
1. The vacuum-formed template prepared on the study model is filled with Cool Temp NATURAL.
2. The vacuum-formed template filled with Cool Temp NATURAL must be placed into the mouth within 35 sec. Excess material should be removed using a plastic instrument.
3. After 30-45 sec in the mouth, Cool Temp NATURAL can be removed. If necessary, the provisional restoration can be tested to determine if it fits properly.
4. After removing the provisional restoration from the preliminary impression or from the prepared tooth, removal of excess material and preparation of the surface can be performed using rotary instruments. The oxygen inhibition layer on the surface of the Cool Temp Natural provisional restoration should be removed using alcohol.
6. Within only a few minutes, a precision provisional is prepared.
5. Synergy D6 Flow is ideal to fill voids, refine margins and improve contacts.
FASTER THAN LEADING BRANDS
UP TO 75% LESS TIME IN MOUTH
Automix Temporary Crown & Bridge Material: oral setting time
Automix Temporary Crown & Bridge Material: setting time
Cool Temp ® Natural Protemp ™ 3 Garant ™ *
Cool Temp ® Natural Protemp ™ 3 Garant ™ * Protemp ™ II * Luxatemp ® Fluorescence *
Integrity ™ * Luxatemp ® Fluorescence *
Protemp ™ II *
Integrity ™ *
Seconds
0
50 100 150 200 250 300 350 400
Seconds
0
50 100 150 200 250 300 350 400 450
Minimum
Maximum
Minimum
Maximum
Cool Temp ® is a registered brand of Coltène/Whaledent. * All other brands are not registered trademarks of Coltène/Whaledent.
Made with FlippingBook - Online catalogs