DUAL CURING BULK COMPOSITE
Fill-Up! ™ Deep. Fast. Perfect.
www.coltene.com
Deep
• Dual-cure • Self-curing, independent of layer thickness • Cures even with very deep cavities
Fast
• Immediate fabrication of the filling is possible, as Fill-Up! is light-cured for just 5 s • No top layer necessary, thanks to outstanding mechanical properties • Universal shade (VITA™ A2–A3) provides excellent self-blend properties • Fast and simple automix application • Minimal shrinkage stress • Optimal marginal sealing with the matched ParaBond bonding agent • Easy to polish to a high luster • Attractive aesthetics under all lighting conditions thanks to fluorescence • Contains zinc oxide
Perfect
Deep uniform curing No matter what layer thickness is applied, there is no need to worry about thorough curing, as Fill-Up!™ consists of both light and chemically curing properties. Other light curing bulk fill materials can be applied in layers of max. 4-5 mm. Light intensity measure- ments demonstrate that above a layer thickness of just 1 mm, light penetration drops drastically. Reliable deep polymerization is therefore not always guaranteed, which can lead to postoperative sensitivities.
Light absorption ¹ Light absorption by composites 1
100 %
SYNERGY D6 Dentin A2 / B2
75 %
Tetric EC BF IVA *
SDR Universal *
50 %
25 %
0 %
0
1
2
3
4
5
For fast results you can always be proud of
Layer thickness of composite in mm Layer thickness of composite in mm
Apply in a single step
Light cure for 5 s or wait for the chemical setting
Adapt and polish the filling
Final result
Marginal adaptation before and after chewing simulation
Before Load
After Load
Two that work together perfectly Fill-Up!™ and ParaBond adhesive system are perfectly matched. ParaBond accelerates polymerization at the cavity margins, which optimizes the marginal sealing of the filling. This specifically prevents the formation of marginal gaps and secondary caries. Study results from the University of Geneva attest Fill-Up!™ has the best marginal sealing values before and after chewing simulation (thermo- mechanical cycling).
90
80
70
60
50
40
30
20
10
0
Tetric Ceram * Ceram-X */ Ceram-X
Venus BF */ Venus Diamond *
Tetric EC BF */ Tetric Evo Ceram *
Sonic Fill */ Sonic Fill
Sure ll SDR */ Ceram-X
Fill-Up! / SYNERGY D6
Fill-Up!
Layering Technique
1 Layer
Bulk 4+2
2-mm-Layer
Bonding
ParaBond
Optibond FL
Syntac Classic
Gentle and safe into depth
Shrinkage stress development at curing ¹
1
0.02
SDR 20“ LC *
Fill-Up! 10“ LC
Fill-Up! chem.
0.015
Large cavities that are filled with just one layer are subject to high shrinkage forces upon curing with light. However, the chemical curing proceeds much more gently (see graphic). And if speed is of the essence, Fill-Up!™ can be light cured. The restoration can then be finished immediately, whereas deeper regions are chemically post-cured. Fill-Up!™ is effortlessly polished to a shine. Studies confirm the superb polishing results together with 2-Step Alpen Composite Plus Polishers and 4-Step Alpen SwissFlex Discs. Fill-Up!™ displayed a very low surface roughness after polishing that is comparable with light-cured composites. Polishes to high gloss
0.01
0.005
0
200
400
600
800
1000
Time in s
Surface Roughness after Polishing ⁵
1.6
Alpen Composite Plus (2-Step)
1.4
Alpen SwissFlex (4-Step)
1.2
3M ESPE SofLex * (4-Step)
1
0.8
0.6
0.4
0.2
0
Fill-Up!
SYNERGY D6 Tetric EC BF *
x-tra fil *
Ketac Molar *
Flexural modulus������������������� 7.260 MPa Flexural strength����������������������� 109 MPa Water sorption����������������������� 19 µg/mm 3 Water solubility�������������������� 0.7 µg/mm 3 Radiopacity��������������������������������� 2 mm AI Vickers hardness������������������������������ 51 HV Volumetric shrinkage (acc. to Watts) ..3.3 % Perfect details 1
Compressive strength�������������� 289 MPa Ø filler particle size�������������������������� 2 µm Filler content by weight������������������ 65 % Filler content by volume ���������������� 49 % Density���������������������������������������� 1.8 g/cm 3 Working time������������������������������������ 1 min Setting time (not incl. working time) .....2 min
Composition: • Dental glass
• Amorphous silicic acid
• Methacrylates • Zinc oxide
Point for point a direct hit
Varied applicability: This medium-viscosity, dual curing bulk composite has been developed for those indications that demand fast, aesthetic and tooth-colored restoration. Fill-Up!™ is suitable for bulk fill technique in the posterior region and can be applied in a single layer of any depth. Surface light curing for only 5 s can finish the restoration with no top layer needed.
A shade for every case: Thanks to its chameleon effect, the universal shade between the levels VITA™ A2–A3 adapts perfectly to every situation and saves time on shade management. In perfect interaction with ParaBond - the bonding agent for an optimized marginal seal - it presents a well-rounded system for all everyday restorative situations in the dental practice.
Fill-Up!™ is indicated for: – Class I and II cavities – Cavity lining – Core build-ups
Only one step away from a perfect result Hole in One
Order information
Fill-Up!™ Dual curing bulk composite
Etchant Gel S Ultimate etchant gel
6001 9341
Fill-Up!™ Refill Fill-Up!™ Universal
7373
Etchant Gel S Kit
1 × 4.5 g
2 × 2.5 ml
Syringes
3 × 4 ×
Mixing Tip Short Super Fine
20 ×
Application Needles
Mixing Tip Short Fine
7876 20 ×
Application Needles
6747 40 ×
Mixing Tip Short Super Fine
black
Mixing Tip, 0 1 mm
6759 40 ×
Mixing Tip Short Fine Mixing Tip, 0 1,8 mm
6001 9342 2 × 4.5 g 1 × 2.5 ml
Fill-Up!™ Intro Kit Fill-Up!™ Universal
Etchant Gel S
ParaBond Chemically curing adhesive system
2 × 3 ml
ParaBond Adhesive A & B Mixing Tip Short Super Fine
6 × 8 ×
Mixing Tip Short Fine
6001 9355
Fill-Up!™ Economy Kit
7493
ParaBond Adhesive A & B Refill
5 × 4.5 g
Fill-Up!™ Universal
1 × 3 ml 1 × 3 ml
ParaBond Adhesive A ParaBond Adhesive B
15 × 20 ×
Mixing Tip Short Super Fine
Mixing Tip Short Fine
* not a trademark of COLTENE
1 Internal measurement 2 Krejci et. al. 2014, Marginal adaptation of bulk filled dual cured composites, publication prepared for ADM meeting 3 Krejci et. al. 2014, Marginal adaptation of class II cavities restored with bulk-fill composites, Journal of Dentistry 4 Besek et. al., zahnfarbene adhäsive Füllungen, PPK Zürich 2004 5 Dr. Flury, University of Bern, data on file
© 2015 Coltène/Whaledent AG - www.coltene.com
Coltène/Whaledent AG Feldwiesenstrasse 20 9450 Altstätten / Switzerland Tel. +41 (0)71 757 53 00 Fax +41 (0)71 757 53 01 info.ch@coltene.com
Coltène/Whaledent GmbH + Co. KG Raiffeisenstrasse 30 89129 Langenau / Germany Tel. +49 (0)7345 805 0 Fax +49 (0)7345 805 201 info.de@coltene.com
Coltène/Whaledent Inc. 235 Ascot Parkway Cuyahoga Falls, OH 44223 / USA Tel. USA & Canada + 1 800 221 3046 + 1 330 916 8800
fill-up.coltene.com
Fax +1 330 916 7077 info.us@coltene.com
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6Made with FlippingBook Digital Proposal Creator