AdvanTech ADVANTECH ™ SUBFLOORING ASSEMBLY
HUBER HOUSE OF BRANDS
10
11
The average jobsite receives rain three times during construction and other factors such as high humidity, snow and ice can expose your projects to even more moisture. Rest assured, AdvanTech ® subflooring’s moisture resistance helps prevent headaches such as warping, swelling and delamination, leaving your finished floors smooth, flat and quiet. Moisture Resistance During and After Construction
24 oc Floor Panels Water Absorption 1
50
46.5
40.3
Highest Average Lowest
40
34.2
30
26.3
18.3
20
13.4
9.2
10
0
AdvanTech ® Subflooring
OSB Competitors
Plywood Competitors
STRENGTH AND STIFFNESS WHERE YOU NEED IT MOST
24-Hour Edge Swell Demonstration
3-Hour Wicking Demonstration
AdvanTech ® Subflooring
Plywood Flooring
AdvanTech ® Subflooring
OSB Flooring
Installs Fast and Lies Flat
Highly Compressed Material High panel density helps reduce the rate of water absorption into the panel, even under harsh weather conditions. Moisture-resistant Resins Advanced resins react chemically with the natural moisture in the wood, creating a highly moisture- resistant substance, similar to polyurethane. Advanced Strength, Stiffness and Fastener-Holding Power
Protection Throughout the Entire Panel Every wood strand is coated with advanced moisture- resistant resins that provide moisture resistance even along freshly cut edges. Edge Sealant For added protection, every edge is coated with sealant to help prevent swelling during long-term storage or exposure to the elements.
AdvanTech ® subflooring brings together a unique combination of bending strength, stiffness and fastener-holding power, so you can get the most from your flooring system. The result is a solid-feeling floor that can enhance the quality of the entire home.
AdvanTech ® Subflooring 1
Performance Category
Panel Size
PS-2 Span Rating
Code Evaluation Report
Edge Profile
Panel Grade
Approx. Weight Per Panel 2
Panels Per Unit
Rated for 19/32"
19/32
4' x 8'
20 oc
x
66 lbs.
55 pcs.
23/32
4' x 8'
24 oc
ESR-1785
78 lbs.
45 pcs.
Design Bending Strength (FbS)
Design Bending Stiffness (EI)
Fastener Withdrawal Calculated Values 2
24 oc Floor Panels (lbf-in/ft)
24 oc Floor Panels (lbf-in 3 /ft)
(lbf/inch of thickness)
7/8
4' x 8'
32 oc
x
96 lbs.
40 pcs.
383,800
T&G
1,600
400K
30
1,250
23
1,200
25
330K
Structural 1
300K
770
770
1
4' x 8'
32 oc
x
109 lbs.
35 pcs.
800
300K
20
18
18
400
15
0
200K
10
1-1/8
4' x 8'
48 oc
x
125 lbs.
30 pcs.
OSB (PS-2) 4
AdvanTech ® Subflooring 3
Plywood (PS-2) 4
AdvanTech ® Subflooring 3
Plywood (PS-2) 4
OSB (PS-2) 4
AdvanTech ® Subflooring 3
Plywood (PS-2) 4
OSB (PS-2) 4
1. All testing was conducted by an independent IAS-accredited testing facility in Septem- ber 2008. This small sample testing was done in accordance with the applicable ASTM standards and test methods. OSB values are based on lowest, average and highest wa- ter absorption levels of four competitors. Plywood value is based on the lowest, average and highest water absorption levels of three competitors. Competitor testing samples correspond to single manufacturing locations from one production date.
2. Allowable nail withdrawal values were calculated in accordance with the 2020 National Design Specification for Wood Construction using a 0.131-inch diameter nail. 3. Based on the design values published in ICC-ES Evaluation Service Report, ESR-1785 and the 2012 APA Panel Design Specification, Form No. D510C. 4. 2020 APA Panel Design Specification, Form No. D510C.
1. Net face width is 47-1/2" on tongue and groove panel. 2. Estimated panel weight. Actual weight may vary by mill.
3. ESR-1785 is an Evaluation Services Report (ESR) issued by the International Code Council Evaluation Service. Evaluation reports from ICC Evaluation Service are frequently used by code officials to verify that new and innovative building products comply with code requirements.
Made with FlippingBook Digital Proposal Creator