BRAKE
Mustang II Brake Rotor Convert stock Mustang II brake assemblies with 9-1/4" diameter rotors to 5-lug rotors and retain the stock brakes. Rotors include 1/2"- 20 wheel studs and utilize the stock bearings and seals (not included). Part No. Description
Metric Brake Rotors New stock replacement brake rotor includes new bearing races and studs for most inter- mediate sized Metric chassis cars including Monte Carlo, Grand Prix, and Regal. Rotors measure 10.5" O.D. x 1.03" thick. Bearings and seal not included. Note: Both rotors will work with Allstar Performance met- ric spindles ALL56318 or ALL56319. 1979-81* Part No. Description ALL42085
ALL42092 Rotor with 5 on 4-1/2" B.C. ALL42093 Rotor with 5 on 4-3/4" B.C. Related Parts Part No. Description ALL72161 Spindle Lock Kit ALL72165 Front Hub Dust Cap ALL72308 Master Bearing and Seal Kit ALL72126 Hub Seal ALL72270 Inner Bearing ALL72280 Inner Bearing Timken ALL72277 Outer Bearing ALL72281 Outer Bearing Timken
ALL42088
ALL42092
Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C. Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C.
ALL72161
ALL42086
*Outer bearing race has a 1.97" O.D. Related Parts For 1979-81 Style Rotor Part No. Description ALL72160 Spindle Lock Nut Kit ALL72164 Front Hub Dust Cap ALL72305 Master Bearing And Seal Kit ALL72128 Hub Seal ALL72275 Inner Bearing ALL72282 Inner Bearing Timken ALL72277 Outer Bearing ALL72284 Outer Bearing Timken
ALL72165
ALL72308
ALL72160
GM Rear Brake Rotor ALL42095 Hat style brake rotor with 5 on 4-3/4" pattern can be used with ALL42180 and ALL42181 7.5" metric caliper brackets and stock type axles. 11-5/8" vented rotor is .790" thick and has a 2.800" I.D. center indexing hole to work with most metric style axle flanges with a maximum O.D. of 6". 40 Vane Directional Rotors Heavy duty 40 vane brake rotors provide added strength and cooling over standard 36 vane ro- tors. 11.75" x 1.25" 8 bolt rotors weigh just 11 pounds and have ball milled slots to keep rotor clean. Part No. Description ALL42004 LH 1.25" x 11.75" 8-Bolt ALL42005 RH 1.25" x 11.75" 8-Bolt 36 Vane Directional Rotors Rotors have 36 directional cooling vanes and are 1-1/4" thick x 11-3/4" dia. Direc- tional cooling vanes allow brakes to run much cooler than conventional rotor designs. Rotors fit solid mounting brake hats or hubs. Part No. Description ALL42000 LH 1.25" x 11.75" 8-Bolt ALL42001 RH 1.25" x 11.75" 8-Bolt
ALL72164
1982-88 † Part No.
ALL72305
Description ALL42087 Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C. ALL42088 Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C. †Outer bearing race has a 1.78" O.D. Related Parts For 1982-88 Style Rotor Part No. Description ALL72164 Front Hub Dust Cap ALL72306 Master Bearing And Seal Kit ALL72128 Hub Seal ALL72275 Inner Bearing ALL72282 Inner Bearing Timken ALL72278 Outer Bearing ALL72283 Outer Bearing Timken Granada Brake Rotor Rotor is often used when converting stock Mustang II brake assemblies to 11" O.D. x .875" brake rotors and larger calipers. Rotors include new bearing races and install directly to Mustang II spindles with stock bearings and seals (not included). Part No. Description ALL42090 Rotor With 1/2"-20 Wheel Studs, 5 On 4-1/2" B.C. ALL42091 Rotor With 1/2"-20 Wheel Studs, 5 On 4-3/4" B.C. ALL42089 Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C. Related Parts Part No. Description ALL72161 Spindle Lock Kit ALL72165 Front Hub Dust Cap ALL72308 Master Bearing And Seal Kit ALL72126 Hub Seal ALL72270 Inner Bearing ALL72280 Inner Bearing Timken ALL72277 Outer Bearing ALL72281 Outer Bearing Timken
ALL72306
ALL42004
ALL42090
ALL42000
Rotor Bolt Kit ALL42026 Grade 5, 5/16" bolts fasten disc brake rotors to rotor hat or hub. Includes ten bolts, ten washers and ten self-locking nuts.
ALL72161
ALL72165
ALL72308
9
Made with FlippingBook flipbook maker