BRAKE
Stamped Steel Rotor Hat ALL42120 Brake hat fits 8-bolt rotors with 7" bolt circle mount. Made of stamped steel with a 3" offset and drilled for 4-1/2", 4-3/4" and 5" bolt circles. Hat has 3.060" diameter centering hole and fits axle flanges with up to 5.75" diameter. Drilled for 1/2" wheel studs. Cast Aluminum Rotor Hats Cast aluminum hats are available in two offsets, fit 8-bolt rotors with 7" bolt circle mount, have a 3.060" dia. centering hole and fit axle flanges with up to 6.050" diameter. Drilled for 1/2" studs. Part No. Description ALL42129 2-1/2" Offset, 2.2 Lbs. ALL42128 3" Offset, 2.5 Lbs. Mustang II Caliper Brackets Install 11" Granada style rotors and intermedi- ate GM metric style calipers on stock height or lowered Mustang II spindles with these bolt-on caliper brackets. Lightweight steel brackets weigh just over one pound each and are sold individually. Part No. Description ALL42110 LH Caliper Bracket ALL42111 RH Caliper Bracket Hybrid Mustang II Caliper Brackets Install smaller hybrid style rotors and interme- diate GM metric style calipers on stock height or lowered Mustang II spindles with these bolt-on caliper brackets. Lightweight steel brackets weigh just one pound each and are sold individually. Part No. Description ALL42118 LH Hybrid Caliper Bracket ALL42119 RH Hybrid Caliper Bracket
Rear Caliper Brackets Made from 1/4" thick steel, brackets fit 3" diameter axle
housings and work
with 11.75" diameter ro- tors. Available for many setups. Clamp-On Brackets Part No.
ALL42102
ALL42103
ALL42186
Description
ALL42101 ALL42103 ALL42185 ALL42186 ALL42105 ALL42109
For Big GM Style Calipers, 7" Spacing
For GM Metric Calipers, 5-1/2" Spacing, Wide Clamp For GM Metric Calipers, 5-1/2" Spacing, Narrow Clamp For GM Metric Calipers, 5-1/2" Spacing, Narrow Clamp With Reinforcing Gussets
ALL42129
Wilwood Dynalite Calipers, 5-1/4" Spacing Wilwood Superlite Calipers, 3-1/2" Spacing
Weld-On Brackets Part No.
Description ALL42100 For Big GM Style Calipers, 7" Spacing ALL42102 GM Metric Calipers, 5-1/2" Spacing ALL42104 Wilwood Dynalite And Sierra Mini GN Dual Calipers, 5-1/4" Spacing ALL42108 Wilwood Superlite And Sierra XL Calipers, 3-1/2" Spacing Ford 9" Axle Spacer Plates Spacer plate takes the place of drum brake
ALL42111
backing plate and properly preloads the tapered style axle bearing. Spacers fit large bearing Ford 9" housing ends. Sold each. Part No. Description ALL72318 Late Torino Style ALL72319 Early Style Related Item Part No. Description ALL72042 Backing Plate T-Bolts (Late Style), 8-Pack Brake Calipers Stock style calipers are perfect replace- ments on most GM vehicles and will fit up to 1" wide rotor. Metric inlet thread is 10mm x 1.50 pitch. Big GM inlet thread is 7/16"-20. Part No. Description ALL42081 RH 1973-77 Big GM ALL42082 LH 1973-77 Big GM ALL42083 RH 1978-87 Metric GM ALL42084 LH 1978-87 Metric GM
ALL42118
ALL72318
GM 7.5" Rear Caliper Brackets Steel bolt-on brackets are used when convert-
ALL42181
ALL42180
ing drum brake equipped 7.5" GM style rear ends to disc brakes. 1/4" thick brackets replace the drum brake backing plates to provide secure mounting for standard intermediate metric calipers (ALL42083 and ALL42084). Part No. Description ALL42180 LH Bracket ALL42181 RH Bracket
Note: We reference RH (right-hand) or LH (left-hand) based on the caliper being mounted behind the rotor, however, all calipers may be mounted on the front or backside of the rotor.
Bleeder Caps ALL50855 Rubber caps keep dirt and moisture out of brake caliper bleeder screw fittings. Caps fit ALL50180 and most other popular small bleeder screws. Package of 10.
10
Made with FlippingBook flipbook maker