BRAKE
Pedal Rod Extensions Steel exten- sions have 3/8"-
Combination Valves Multi-purpose valves are used in the brake system to properly distribute fluid to the front and rear brakes, meter the amount of fluid and pressure delivered to each brake and provide an option to connect a warning light to alert in case of brake failure. Part No. Description ALL41040 Disc/Drum ALL41042 Disc/Disc Related Part Part No. Description ALL41044 Connector For Warning Light Residual Check Valves
24 threads and are often used to connect the brake pedal to the master cylinder or booster using a female rod end or a clevis. Part No. Description ALL41027 4-3/4" Long Overall With 3" of Male Thread ALL41028 9" Long Overall With 1" of Male Thread
ALL41040
Brake Pedal Clevis ALL41026 Clevis fastens to the brake pedal arm to accept a threaded rod extension or power brake booster pushrod. Clevis is threaded for a 3/8"-24 rod and has a 3/8" pin.
Residual check valves hold a small amount of pressure in the brake system to keep the brake system function- ing properly while helping
Plunger Style Brake Light Switch ALL76253
ALL41048
Popular two terminal brake light switch found in most vehicles from the 1950’s to today. Ideal for most applications, switch is spring loaded to the on position and turns off when contacted by the brake pedal assembly. Switch has 1/2" threads with jam nuts for easy mounting in a bracket, and two .250" blade type terminals. Lever Style Brake Light Switch ALL76250 Switch is commonly used with under-floor ALL76250 Spring loaded switch is designed to return to the open position and has two #10-32 tapped mount- ing holes, 5/8" on centers. Designed for easy two wire connection, one "+" supply and the other to power brake lights or a brake light relay. Switch is rated at 4.5 amps and features two male bullet terminals. Pressure Activated Brake Light Switches Switch is plumbed into the brake system and is activated by clos- ing the electrical connection with rising brake pressure (60-120 PSI). Designed for easy two wire connec- tion, one "+" supply and the other to power brake lights or a brake light relay. Switches are rated at 4.5 amps and have 1/8"-27 dry seal mounting threads. Part No. Description ALL76251 Male Bullet Terminals ALL76252 6-32 Screw Terminals Proportioning Valve ALL48025 Adjust front-to-rear brake bias ALL76252 ALL76251 mounted brake pedal assemblies when switch can contact the brake pedal arm.
to maintain a firm pedal. Maintaining system pres- sure prevents fluid from returning to the master cylinder when the master cylinder is positioned lower than or close to the same height as the calipers or wheel cylinders. Proper system pressure also keeps piston and wheel cylinder seals expanded creating a positive seal and brake pads seated against the rotor. Valves include two 3/16" inverted flare fittings. Part No. Description ALL41048 2 Lb. For Disc Brakes ALL41049 10 Lb. For Drum Brakes ALL41049
Brake Bleeder Bottles Contain the mess of bleeding brakes by capturing fluid in this 16oz. bottle with a 12" long hose which attaches to most bleeder screws. The removable cap has a built-in fitting to secure the hose during storage to help prevent spills. Choose from a steel lanyard retainer that suspends the bottle
ALL11019 ALL11018 ALL11017
from a chassis or suspension component or a magnet retainer to secure the bottle to a steel object such as a brake drum or rotor during bleeding. ALL11017 has a magnet retainer and a one way check valve built-in for one person brake bleeding. Part No. Description ALL11019 Bottle With Lanyard ALL11018 Bottle With Magnet ALL11017 Bottle With Magnet And Check Valve Electric Line Lock Kit
An electrically controlled valve that engages with a switch, holds pressure to the front brakes on drag race vehicles. Commonly used to prevent vehicles from rolling once they have staged or during burn outs in the water box. Detailed installation instructions included. Part No. Description ALL48012
with the twist of a knob. Provides up to 57% reduction. Fitting ports are 1/8"NPT. Valve includes two fittings to adapt to 3/16" brake line. 1" long, 1-3/4" wide and 3-5/16" tall.
ALL48012
Electric Line Lock Master Kit Electric Line Lock Kit With Fittings
ALL48013 ALL48014
Electrical Hardware Kit
12
Made with FlippingBook flipbook maker