CHASSIS
8-Point Roll Bar Kits Kits increase safety and the structural integrity of the vehicle. Main hoops are custom bent to fit each application precisely. Hoop and bars con- structed of .134" mild steel, 1-3/4" diameter tubing. Welding required. Floor plates sold sepa- rately for unibody cars. Part No.
Lower Seat Mounts Mounts attach through floor pan to a bar or plate on left frame rail or roll cage for
seat and anti-sub belt mounting. Layback mount is raised; upright bracket has a low profile. Part No.
Description
ALL60070 ALL60071
Layback Seat Bracket Upright Seat Bracket
Seat Mount Brackets Made from 1/8" thick mild steel. Upper bracket is angled to fit against the back of
Kit Shown Assembled
Description
ALL60032
most aluminum racing seats, two-piece design allows front-to-back and side-to-side adjust- ment. Upper mount brackets may be bolted or welded. Lower mount welds to 1-1/2" or 1-3/4" tubing. Part No. Description ALL60032 Upper, 2-Piece ALL60033 Lower Double Shear Seat Belt Tab ALL60031 Bracket welds to chassis and for solid seat belt mount to the chassis, yet still pivot. Double shear design provides twice the strength of a single tab style mount. Steel bracket accepts 1/2" hardware. Fuel Cell Mounting Bracket ALL60063 Steel bracket is radiused to fit 1-1/2" tubing and has (8) 3/8" holes on 1/2" centers. Bracket is .085" thick and 1-1/2" wide x 4-3/4" tall. Fuel Cell Mounting Brackets Steel brackets are .125" thick, 1-3/4" wide and available in three lengths. All have 3/8" holes. Part No. Description ALL60060 2" Long ALL60061 3" Long ALL60062 4-3/4" Long
ALL22600 ALL22601 ALL22604 ALL22608 ALL22610
Camaro/Firebird 1967-69 Camaro/Firebird 1970-81
Camaro 2010-15
G-Body (Monte Carlo, Cutlass, Regal, Grand Prix) 1978-88
Mustang/Capri 1979-93
ALL60033
10-Point Roll Cage Kits Kits increase safety and the structural integrity of the vehicle. Main hoops are custom bent to fit each application precisely. Hoop and bars con- structed of .134" mild steel,
1-5/8" diameter tubing. Welding required. Floor plates sold separately for unibody cars. Part No.
Kit Shown Assembled
Description
ALL22620 ALL22621 ALL22628 ALL22630
Camaro/Firebird 1967-69 Camaro/Firebird 1970-81
G-Body (Monte Carlo, Cutlass, Regal, Grand Prix) 1978-88
Mustang/Capri 1979-93
Floor Plates ALL22640 Bolt or weld these steel plates to the floor pan as required by most sanction- ing bodies when installing roll bars into unibody cars. Increase the structural integrity and provide a solid mounting point for the roll
bar. 6" x 6" plates are 1/8" (.125") thick and may also be used for a variety of other uses including fabricating brackets or mounts. Package of 6.
Strut Bars ALL22642 Strut bars increase the rigidity and strength of a chassis eliminating flexing and increasing reaction times. Bars can be
installed to upgrade existing ten point cage kits or when building a new chassis. Pre-bent to fit a variety of applications, bars are 65" long overall with a 14" leg and constructed from 1-5/8" x .134" wall mild steel tubing.
WASP SPEED SHOP
13
Made with FlippingBook flipbook maker