No-Weight Racing Batteries Enhanced Mat Technology and calcium full frame powerpath grids deliver the highest energy-to-weight levels in the industry. Designed specifically for a racing environment, AGM style 12-volt batteries use high density oxide for true deep-cycling and the heavy duty, vibration-resistant power posts will not crack or deteriorate. Choose from batteries with conventional or advanced, carbon com- posite/polymer plastic cases. Lightweight aluminum battery mounts are also available. Standard Part No. Carbon Fiber Part No. Weight Lbs. Dimensions (L. x W. x H.) Pulse Cranking Amps Cranking Amps @ 32° F. Cold Cranking Amps @ 0° F. Mount Part No.
BRBB106 BRBB129
— 6.6 5.8" x 3.4" x 4.1" — 9.5 5.8" x 3.4" x 5.1" — 11.5 5.8" x 3.4" x 5.8"
527 813 904
283 436 486 574 641 641 742
210 323 360 425 475 475 550
BRB1018 BRB1218 BRB1418 BRB2018 BRB2318 BRB2318
BRBB14115
BRBB2015 BRBB2015C 15 6.8" x 3.4" x 6.1"
1067 1191 1191 1380
BRBB2317
— 17 — 17
6.8" x 4" x 6.1" 6.8" x 4" x 6.1"
BRBB2317RP*
BRBB3121 BRBB3121 BRB3118 * Battery includes right side positive terminals, which allows for side-by-side configuration when used with BRBB2317. Lithium-Ion Racing Batteries 21 6.6" x 5.2" x 6.8"
Battery Chargers The safe way to extend the life of Braille batteries. 12 and 16-volt battery chargers are offered for AGM or lithium-ion batteries. Sold complete with alligator clamps and quick disconnect leads. Part No.
Lighter, more powerful and increased efficiency. Lithium-Ion batteries are over 50% lighter than tra- ditional batteries, yet offer superior cranking power. Batteries provide increased, cleaner voltage for im- proved performance of electrical system components.
Pulse Cranking Amps
Dimensions (L. x W. x H.)
Amp Hour
Lithium Amp Hour
Reserve Capacity
Description
Part No. Weight
BRB1232 BRB1236L BRB12310L BRB12325L BRB16325L BRB1636L
12-Volt AGM 2-Amp Battery Charger 12-Volt Lithium-Ion 6-Amp Battery Charger 12-Volt Lithium-Ion 10-Amp Battery Charger 12-Volt Lithium-Ion 25-Amp Battery Charger 16-Volt Lithium-Ion 25-Amp Battery Charger 16-Volt Lithium-Ion 6-Amp Battery Charger NEW!
BRBGU1R 6.4 lbs. 7.68" x 5.13" x 7.13" 947
13
39 48
32
BRBML20C 5.9 lbs. 60 Note: Batteries require the use of a lithium battery charger; a standard lead battery charger cannot be used. 7" x 3.5" x 6" 1152 16
SB Chevy Compatible Cast Iron Blocks Manufactured in the USA from premium iron alloy, small block Chevy Compatible Cast Iron Blocks include priority main oiling, nodular iron four-bolt splayed main caps and a variety of other features. A truly affordable, heavy duty small block that features two-piece rear main seal, standard 9.025” deck height, standard cam diameter and location, while allowing compatibility with OEM-style oil pans, fuel pumps, motor mounts, starter location and clutch linkage. Offered with choice of 4.000” or 4.125” bore sizing. Part No. Deck Height Cyl. Bore Main Dia. BROBRS400035842 9.025” 4.000” 2.450” BROBRS412535842 9.025” 4.125” 2.450” BROBRS412540842 9.025” 4.125” 2.650” Note: Blocks will require align honing. Special oil restrictors are available only through Brodix. BB Chevy Compatible Cast Iron Blocks
Heavy duty and proudly manufactured in the USA, premium iron alloy blocks incorporate priority main oil- ing, nodular iron four-bolt splayed main caps, additional head bolt lugs, two-piece rear main seal and many other features. Cost-effectively priced blocks are fully compatible with a variety of OEM-style components including oil pans, fuel pumps, motor mounts, starter location and clutch linkage. Choose from standard, 9.800” or tall 10.200” deck height blocks with 4.500” bore sizing. Part No. Deck Height Cyl. Bore Main Dia. BROBRB4584212 10.200” 4.500” 2.749” BROBRB4584298 9.800” 4.500” 2.749” Note: Blocks will require align honing. Special oil restrictors are available only through Brodix. Compatible Cast Iron Block Finishing Kits Finishing kits include all plugs, dowel pins and cam bearings necessary. Part No. Description BROSK-BLOCK-BB-CI BB Chevy Iron Block Finishing Kit BROSK-BLOCK-SB-CI SB Chevy Iron Block Finishing Kit SB Chevy High Velocity Intake Manifold BROHV1006 Engineered for use with Brodix -10X or Pontiac “867” cylinder heads and a 4500 “Dominator” style car- buretor, single plane intake features a 4,000-8,000 RPM range. Manifold is 7.150” tall and requires FEL1263 (trim-to-fit) intake gasket.
164
Made with FlippingBook flipbook maker