CHASSIS
Tubing End Caps Steel end caps weld to the end or inside of tubing to provide a clean look, prevent sharp exposed edges and seal tubes to keep out dirt and debris. Caps are commonly used on ends of bumpers, to fill existing holes in frames and as a flat gusset when butt joining sections of square or rectangular tubing. Package of 10. Part No. Description Thickness Round End Caps ALL22280 7/8" O.D. .125" ALL22285 1" O.D. .125" ALL22281 1-1/4" O.D. .125" ALL22286 1-3/8" O.D. .125" ALL22282 1-1/2" O.D. .125" ALL22283 1-5/8" O.D. .125" ALL22287 1-11/16" O.D. .125" ALL22284 1-3/4" O.D. .125" Square End Caps ALL22290 1" x 1" .085" ALL22291 1.5" x 1.5" .085" ALL22292 2" x 2" .085" Rectangle End Cap ALL22294 2" x 3" .085" Gussets Gussets add support and mounts. Solid, one or three hole gussets are 1-7/8" tall x 1/8" thick. Reinforced gussets are 2-1/8" tall x 1/8" thick with a rolled edge for added strength. Description 10-Pack Part No. 100-Pack Part No. Solid ALL22192 ALL22192-100 With One Hole ALL22194 ALL22194-100 With Three Holes ALL22196 ALL22196-100 Wrap Around Gussets ALL22199 Gussets fit 1.50" to 1.75" tubing and strength to tubing joints when building roll cages or chassis
Weld-On Nuts Weld these steel nuts into a predrilled hole to provide a strong and easy method of bolting brackets or accessories to chassis. Nuts are often used when the back side of a fastener in not accessible and they allow quicker installation and/or removal of chassis components.
ALL18546
1/4"-20 Nut for 3/8" Hole Part No.
Description
ALL18546
(5/16" UHL), 4-Pack (5/16" UHL), 25-Pack
ALL18546-25
3/8"-16 Nut for 3/4" Hole Part No.
Description
ALL18549
Short (3/8" UHL), 4-Pack Short (3/8" UHL), 25-Pack Long (7/8" UHL), 4-Pack Long (7/8" UHL), 25-Pack
ALL18549-25
ALL18550
ALL18550-25
1/2"-13 Nut for 3/4" Hole Part No.
Description
ALL18551
Short (3/8" UHL), 4-Pack Short (3/8" UHL), 25-Pack Long (7/8" UHL), 4-Pack Long (7/8" UHL), 25-Pack
ALL18551-25
ALL18552
ALL18552-25
Battery Boxes Universal, lightweight steel battery boxes may be welded or bolted to the frame. Boxes are avail- able in two sizes and include hold down hardware. Part No. Description ALL76100 Full Size, 12" Wide x 7-1/4" Deep ALL76101 Short Style, 10" Wide x 7-1/4" Deep Bolt-On Battery Boxes Battery box has multiple 1/2" mount- ing holes to bolt box directly to the frame rail, inner fender or firewall. Box can also be fastened to round tubing using clamp-on ballast brackets. Constructed of 13 gauge steel, measures 11" wide x 7" deep and includes 3/8" battery hold down hardware. Part No. Description ALL76102 Clear Zinc ALL76103 Black Stainless Steel Drop-Out Battery Box ALL76105 The perfect battery box where battery mounts under floor. Eases battery ser- vice and replacement. Box is 10-1/2" wide, 7" deep, and 9-1/2" tall and will accept most standard batteries. Drag Race Battery Box ALL76106
can be used to join tubing from 70° to 110°. Wrap around style gussets are 1/16" thick and provide more support and rigidity than a stan- dard flat gusset. Sold in packs of 10. Rub Rail Flange ALL60023 Flanges are 3/16" thick and commonly used when building bolt-on style rub rails. Center hole accepts 1-1/4" tubing and has two 3/8" mounting holes spaced 2-1/4" apart. Package of 4. Charging Post Bracket ALL60064 Securely mount Allstar charging posts on vehicles where battery is not easily accessible. Predrilled holes allow quick mount-
ALL76103
ing to frame or body. Double-D hole design positions posts close together, but provides enough room for charging or jumper cable clamps. Charging posts sold separately.
Drag Race style battery box may be welded or bolted to any chassis. Lightweight box is 7-1/4" wide x 10- 1/4" deep, and includes hold down.
17
Made with FlippingBook flipbook maker