Radiator Mounting Kit CCE4111 Engineered for Scirocco style radia- tors, kit includes mounting posts and quick pins for easy removal. Strut Mount Brackets Brackets adapt the top of stud mount struts to chassis. Part No. Description CCE6020-1D LH Bracket, Pre-Formed CCE6020-1P RH Bracket, Pre-Formed CCE6020-1 Strut Mount Bracket, Flat CCE6020-1C
Engine Torque Limiter CCE5050 Eliminates torque twist of the
engine and transmission in chassis, improving 60’ and reaction times. Sold complete with mounting brackets. Front End Travel Limiter CCE4109 One of the easiest ways to improve reaction times or correct handling problems
is by installing Front End Limiters. Limiters will work on most stock or aftermarket front suspensions. Sold in pairs with instal- lation hardware.
Strut Mount Bracket, Flat, Chrome Moly
Aluminum Front Motor Plates Front motor plates provide
Pinto Billet Aluminum Rack Mount CCE2701 Rigid, billet aluminum unit is used to mount popular, 1971-72 Pinto style rack and pinion steering units to front crossmember. Sold complete with necessary hardware.
the strongest possible mount, preventing engine movement, while reinforcing the front chassis and suspension for better handling. CNC-machined from a single piece of 1/4” thick 6061-T6 aircraft quality aluminum, the plates fit perfectly. Plates are 36” wide and can be cut to fit most chassis. Mounting kit (CCE3705), which consists of 1/8” steel frame tabs and Grade 5 bolts, must be purchased separately. Part No. Description Part No. Description CCE3692 BB Chevy, Lightweight Profile CCE3702 BB Mopar CCE3697 SB Ford 289-351W CCE3708 BB Ford 429-460 CCE3700 SB Chevy CCE3705 Motor Plate Installation Kit CCE3701 BB Chevy ment. Accommodates installation with different engine setbacks. Mounting kit (CCE3705), which consists of 1/8” steel frame tabs and Grade 5 bolts, must be purchased separately. Part No. Description CCE3695 3/16" Chevy, Aluminum, Door Car, 20" Tall x 30" Wide CCE3696 1/4" Chevy, Aluminum, Dragster/Altered, 24" Tall x 24" Wide CCE3704 SB Mopar, Steel CCE3706 BB And SB Chevy, Steel CCE3705 Motor Plate Installation Kit Motor Plate Mount Kit CCE3690 Mid-Mount Motor Plates Plates bolt to the rear of V8 engine and fit any chassis to minimize block twisting, preventing transmission damage and poor clutch disengage-
Pinto Rack And Pinion Mount Made from 1/8" mild steel with 7/16" holes and 1-3/4" radius. Part No. Description CCE3903R Right Hand Mount CCE3903L Left Hand Mount Tie Rod Tube Kits Tubes slip over and weld to stock rack and pinion tie rods and
may be trimmed to fit any chassis. Kit includes two tie rod tubes, two 7/16" or 1/2" spherical rod ends with alignment bushings and instructions. Part No. Description CCE1900 Tie Rod Tube Kit, 7/16" Rod Ends CCE2700 Tie Rod Tube Kit, 1/2" Rod Ends Complete Steering Column Kit Versatile steering column installation kit works in virtually any chassis. Includes anodized aluminum column tube, weld-on U-joint, splined steering adapter, clamps, mounting brackets, braces, and a quick disconnect. Part No. Description CCE2710A Complete Steering Column Kit CCE2710
Mounting brackets have flats to support the plate in the correct position for bolting in place on tube chassis cars. Kit includes mounting brackets, spacers, and hardware. Engine Travel Limiter CCE5052 Travel Limiter prevents forward and rearward
Complete Steering Column Kit With Aircraft Quality U-Joint Aircraft U-Joint With Boot Only, 3/4" x 3/4" Bore Complete Steering Column Kit, Chrome Moly
CCE2727 CCE2728 CCE2730
Steering Column Shaft Support Only
Steering Wheel Adapter CCE4705 Adapts a 5-hole steering wheel mount to a 3-hole quick disconnect assembly.
movement of the driveline, improving reaction time and shift qual- ity. Includes chassis brackets, engine mounts, rod ends, hardware and instructions.
181
Made with FlippingBook flipbook maker