Shifter Mount CCE5800 Shifter mount will fit on any crossmember, driveshaft loop, or frame rail. Most shifters can be adapted to the 1/8" x 4" x 12" mild steel plate. Made from 1" x .058" material. Sleeve and pin are included for quick shifter removal. Nitrous Bottle Mounts
Wheel Wells Replace factory inner wheel wells to accommodate larger rear tires, narrowed rears and frames. Available in alumi- num or steel, “tubs” incorporate a Pittsburgh seam for easy assembly and are beaded for a professional appearance. Shipped unassembled. Part No. Description CCE3681 23" x 40" x .040" Aluminum, Pair CCE3682 23" x 40" x .024" Steel, Pair CCE3685 28" x 45" x .040" Aluminum, Pair CCE3686 28" x 40" x .040" Aluminum, Pair Fuel Door Kit CCE4492 Fuel door kit is 6" x 6". Pro Adjustable Rear Spoiler
Unfinished steel brackets are offered in several configurations to securely mount a nitrous bottle. Part No. Description CCE5500 Dual Nitrous Bottle Mount, Stand Up CCE5501 Single Bottle Nitrous Mount, Stand Up CCE5502 Dual Nitrous Bottle Mount, Lay Down CCE5503 Single Nitrous Bottle Mount, Lay Down Parachute Release Cable Kit Install a chute release mechanism in any car with this kit which includes 18' long PTFE lined Felsted cable, stain- less steel field clamp and mounting hardware. Part No.
Description
CCE7600 CCE7600-3
Parachute Release Cable Kit
Flat Cable Mount Only, 1/8" Thick Mild Steel, 3/16" Holes
Compensate for changing track conditions with this 60" long x 16" wide universal spoiler. Fabricated from .063" aluminum, it may be easily trimmed for a custom fit. Includes fasteners, adjustable strut rods, quick pins, aluminum brackets, and instruc- tions. Part No. Description CCE8011 Pro Adjustable Rear Spoiler CCE8016 Additional Strut Rods For Wing, Each (Does Not Include Quick Release Pins) CCE8016-1L LH Wing Strut Rod Mounting Kit CCE8016-1R RH Wing Strut Rod Mounting Kit Parachute Frame Mount CCE7601
Firewall Kits Universal firewall kits, offered in .040” aluminum
or .024" steel, are 60" wide and 24" tall with a steel cowl cap and A-pillar caps. Replace fac- tory firewalls or use in tube chassis cars. Easily trimmed to fit most cars. Part No. Description CCE8080 Aluminum Firewall Kit CCE8081 Steel Firewall Kit Related Component CCE8035 Aluminum Firewall Flange Kit, Allows Tunnel Removal For Transmission/Clutch Access
Strong and simple mount attaches parachute to virtually any chassis. Includes hardware and tubing. Welding required.
Aluminum Dash Board CCE8030 Universal dash board is fabricated from .040" aluminum and is 60" wide to fit any car. Dash board is easily trimmed to fit and includes end caps to finish. Transmission Tunnel Kits Universal transmission tunnel kits, offered in .040" aluminum or .024" steel, will fit most chas- sis and transmissions. Includes right
Parachute Pack Mount
CCE7603
CCE7602
Mounts parachute far enough away from the rear of the car to clear wings or spoilers. Includes a quick release pin and post for quick and easy removal of the chute pack for trunk access. Requires welding. Part No. Description CCE7602 Parachute Pack Mount CCE7603 Round Tube Parachute Pack Mount (Unwelded)
and left side tunnel halves (28" W. x 30" L.), driveshaft cover (28" W. x 36" L.), and matching floor pieces. Part No. Description CCE8020 Aluminum Transmission Tunnel Kit CCE8021 Steel Transmission Tunnel Kit
183
Made with FlippingBook flipbook maker