Tube Chassis Safety Loops Mandrel bent safety loops are used on tube chassis cars. Part No. Description CCE4034 Driveshaft Loop Kit With Sleeves And Pins CCE4035 Tubular Driveshaft Loop With X-Member CCE4035-1 U-Bend Loop Only CCE4036-1 360° Loop Only CCE4037 360° Loop, Sleeves And Pins CCE4038 360° Chrome Moly Loop, Sleeves And Pins (Unwelded)
Diagonal Links Eliminate lateral movement of the rear end on four link and coil spring ladder bar suspensions.
“Top Gun” Diagonal Link CCE3745 1.0" x .065" x 36" chrome moly unit
is Chassis Engineering’s lightest and strongest diagonal link. Includes 1/2" chrome moly misalignment rod ends, all hardware and instructions. Bolt-On Diagonal Link Chassis Engineering’s popular link is suitable for most bracket classes and Super Gas. Made from 3/4" x 35" x .156" wall DOM tubing with 1/2" misalignment rod ends, bolt-on brackets, hardware and instructions. Part No. Description CCE3748 Diagonal Link, 5/8"-3/4" Holes CCE3750 Diagonal Link, 3/4"-3/4" Holes Heavy Duty Weld-On Diagonal Link CCE3749 Heavy-duty link is for severe applications. Constructed from 1.0" x 30" x .156" wall DOM tubing and includes 3/4" mild steel rod ends, weld-on mounting brackets, hardware and instructions. Chrome Moly Pro
CCE4034
CCE3748
Rear Driveshaft Loop Rear Driveshaft Loop bolts di-
rectly to the pinion support of Ford 9" rears, securing the rear of the driveshaft in the event of a u-joint failure. Part No. Description CCE4020 “Top Gun” Anti-Roll Bar Kit CCE3761 High quality, lightweight anti-roll bar kit is designed for maximum strength and durability. Maximum length is 24", but may be shortened to any length during installation. Includes two link mounts, hardware, rod ends and instruc- tions. Requires welding. Sportsman Anti-Roll Bar CCE3755 Eliminates side to side roll and equalizes traction to both rear tires. Improves 60 ft. times. May be mounted on any chassis. Includes a 28" steel anti-roll bar, 24" mounting tube, billet aluminum arms, adjuster links, rod ends, hardware and instructions. CCE4020U
Rear Driveshaft Loop, Standard 5-Bolt Pinion Support
Rear Driveshaft Loop, Strange Ultra Case
Wheelie Bars Lightweight 4130 chrome moly pro wheelie bars are com- pletely adjustable for width during installation, and for height at any time for fine tuning. Cross shaft and bracing provide unmatched lateral stability and strength, and allow for jack placement without interference. Part No. Description CCE3621
CCE3623
Pro Wheelie Bars, Black Powder Coated 50" Pro Stock Wheelie Bar Kit, Unwelded 84"
Wishbone Rear Axle Locator Kit CCE3746 Wishbone-type locator
CCE3623
Replacement Components CCE3619
Roller Bearing Wheel, Each
CCEWEZ1001
Orange Wheelie Bar Wheel, 3/8" Hole, Pair
locates the rear end housing with minimal changes in geometry and no binding through the full range of suspen- sion travel. Made of 1.0" x .065" wall chrome moly tubing and complete with all rod ends, hardware, brackets and instructions. Panhard Bar CCE3747 Panhard bar positively locates the rear end
Rim Screw Template CCE8125 Quickly and easily mark 15" wheels for installation of rim screws.
Bolt Circle Template CCE8126 Determine bolt circle by placing over studs or wheel bolt holes. Identifies 5 on 5-1/2", 5 on 5", 5 on 4-3/4", 5 on 4-1/2" and 5 on 4" bolt circles.
housing and is highly recommended for street use where good cornering char- acteristics are a necessity. Kit in- cludes 30" steel bar, mild steel
rod ends, frame brackets, rear end brackets, hard- ware and instructions.
187
Made with FlippingBook flipbook maker